Revox ist 2003 stolze 75 Jahre alt geworden. Alleine das ist schon Grund zum Feiern. Aber Revox hat auch ein besonderes Angebot für Fans, man kann gewissermaßen Mitglied in einem sehr exklusiven Club werden.
>> Mehr erfahren>> Alle anzeigenVon Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Phono Vorverstärker
Ausstattungsliste: VAC Signature Mk IIa SE
Technical specification | |
Gain | 12 dB |
Inputs | 3 sets RCA line input |
2 sets balanced/RCA selectable inputs | |
set RCA cinema bypass input | |
Optional 1 MM and 1 MC (or additional line input if phono is not fitted) | |
Outputs | 2 sets RCA |
2 sets balanced XLR (EIA “pin 2 hot” studio standard) | |
Tubes | 2x 8416, 7308, 6922, E88CC, ECC88, 6DJ8, (or 12DJ8 twin triodes) |
Absolute Phase | correct from all inputs to all outputs |
Frequency Response | Flat over audio band –3 dB bandwidth 5 Hz – 210 kHz |
THD | <0.009% @ 1 kHz, 1 V RMS |
Maximum Output | < 8 V RMS |
Output Impedance | < 150 ohms, 20 Hz - 20 kHz, static (i.e., not dependent upon feedback) |
Maximum Input | Infinite signal (attenuation precedes the gain circuitry) |
Recommended Output Load | > 300 ohms |
Power | External power supply, detachable umbilical cable, detachable IEC power cord |
Cinema Bypass | Yes |
Voltage | May be ordered for 100v, 120v, 220v, or 230/240v operation |
Remote Control | included |
Illumination | Illuminated logo may be switched off |
Finish | Hand-rubbed gold-flake gloss black lacquer with chrome knobs standard. |
Hand-rubbed metallic gloss silver lacquer with chrome knobs special order with additional cost. | |
Dimensions (H x W x D) | Audio chassis (not including knobs and connectors): 5.5" x 18" x 14.5" (14 cm x 45.7 cm x 36.8 cm) |
Power supply (not including connectors): 4.3" x 18" x 14.5" (10.9 cm x 45.7 cm x 36.8 cm) | |
Shipping Weight | With phono: 61 lbs. (27.7 kg.) |
Phono Stage (optional) | |
Tubes | 6x 12AX7 |
Gain | 44 dB MM |
64 dB MC | |
Frequency Response | RIAA standard +/- 0.2 dB (20 Hz - 20 kHz) -3 dB bandwidth 10 Hz - • 80 kHz |
Channel Separation | > 80 dB @ 1 kHz |
Maximum Input | > 130 mv @ 1 kHz, MM |
> 13 mv, MC | |
MC Load Impedance | selectable, 470, 300, 250, 200, 150, and 100 ohms |
MM Load Impedance | selectable, 47k, 30k, 25k, 15k, and 10k ohms |
Overload | 117MV @ 1kHz = 8 volts RMS output; 460MV @ 10kHz |
Residual Noise | Less than 3MV at output (s/n ratio greater than approx. 69db) |