Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Royer Labs R-122V
Specification | |
Type | Vacuum Tube Ribbon Microphone |
Acoustic Operating Principle | Electrodynamic pressure gradient with vacuum tube electronics. |
Vacuum Tube | JAN mil-spec 5840W pentode wired in triode configuration |
Polar Pattern | Figure-8 |
Generating Element | 2.5-micron aluminum ribbon |
Magnets | Rare Earth Neodymium |
Frequency Response | 30 -15,000 Hz +/- 3dB |
Sensitivity | -36 dB (re. 1v/pa +/- 1 dB) |
Self-Noise | < 18 dB |
Output Impedance | 200 Ohms, balanced |
Rated Load Impedance | Rated Load Impedance: 1 K-Ohm |
Maximum SPL | >135dB SPL @ 20 Hz |
Power Requirements | Plate supply: 135 VDC @2ma, Filament supply: 6 VDC@ 150ma from dedicated power supply. |
Supply Current | 4 mA |
Dimensions | 206mm L, 25mm W (8 1/8 " L, 1" W) |
Weight | 300g (10.9 oz ) |
Finish | Dull Satin Nickel/Matte Black Chrome optional |