Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenEs gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: UNIKA PRO BT5
Specification | |
Type | Passive DI box |
Circuit principle | Passive/Transformer balance output |
Bluetooth Version | Ver 5.0 A2DP DUAL MODE with BLE, DID list ready |
On board DA convert & sample rate | 16bit / 44.1KHz |
Communication codec | SBC / AAC, A2DP standard |
Power supply | 5VDC supplied from external power supply or power bank through Type-C connector with LED status indicator |
Blue-tooth syncronization indicator | LED |
Actual transmission distance | 25~35 meters tested by Android & iOS |
Output connector | 2 x Male XLR through ISO Transformer |
Output GND/LIFT switch | Shared push button |
Max Output level | 0.99Vrms |
Headphone power output | 30mW per channel into 32Ω |
5mW per channel into 600Ω | |
Frequency response | 20Hz-20KHz, ±0.5dB |
S/N ratio @20Hz~20KHz un-weight | >95dB |
T.H.D. @1KHz 0dBV output | <0.005% |
Transformer Ratio | 1:1+1:1 |
Output impedance | 50Ω, transformer balance |
Chassis | 1.6mm/1.2mm steel cabinet and chassis plus acrylic to improve wireless penetration |
Surface finished | Durable complex painting |
Dimension (W x D x H) | 78 x 124 x 46 mm |
Weight | 0.61Kg |