462_22882_2
Topthema: Feurig
High-End-Standbox mit ESS AMT
Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigen
390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Krix MX-40
Ausstattung & technische Daten
| Specification | |
| Type | Cinema Loudspeaker |
| LCR Speaker Modules | |
| Frequency Range | 38Hz-16kHz in room response |
| Power Handling | Low frequency element 100 – 700 Watts RMS recommended amplifier power |
| High frequency element 100 – 400 Watts RMS recommended amplifier power | |
| Sensitivity | Low frequency element 98dB for 2.83 volts at 1 metre |
| High frequency element 101dB for 2.83 volts at 1 metre | |
| Impedance | Low frequency element 8 Ohms |
| High frequency element 8 Ohms | |
| Configuration | 3-way Bi-amp |
| Crossover Frequency | 400Hz Active crossover required – see manual for recommended crossover settings |
| Enclosure Type | Bass reflex, front vented |
| Low Frequency Driver | Single 380mm (15″) high stiffness paper cone driver with 75mm (3″) voice coil of optimal length for increased linear excursion, wound on high temperature apical former and powerful vented magnet assembly designed for low distortion |
| Mid Frequency Driver | Krix proprietary 90º x 40º short throw dual horn with 152 mm (6″) paper cone driver, ferrite magnet, 38 mm (1 ½”) voice coil and copper shorting ring |
| High Frequency Driver | Krix proprietary 90º x 40º short throw dual horn with 25mm (1′)’ throat, 35mm (1.4”) compression driver, ferrite magnet, coated titanium diaphragm and polyimide surround |
| Input Terminals | Gold plated spring terminals |
| Dimensions | 1220mm high x 550mm wide x 335mm deep (3165mm wide including subwoofer modules) |
| Subwoofer Modules | |
| Frequency Range | 25Hz-200Hz in room response |
| Power Handling | 200 – 1400 Watts RMS recommended amplifier power |
| Sensitivity | 100dB for 2.83 volts at 1 metre |
| Impedance | 8 Ohms |
| Enclosure Type | Bass reflex, front vented |
| Low Frequency Driver | Single 455mm (18”) paper cone driver. 100mm (4”) edge-wound copper voice coil, dual spider assembly and vented magnet assembly |
| Input Terminals | High level gold plated spring terminals |
| Dimensions | 1220mm high x 750mm wide x 335mm deep (3165mm wide including LCR modules) |
| System Recommendations | |
| Recommended Room Depth | 5m – 14m |
| Min. Screen Size 16:9 | 145″ (3210mm x 1806mm) |
| Minimum Screen Size 21:9 | 135″ (3152mm x 1351mm) |
