Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenVon Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Audix L5
Specification | |
Type | Micro Lavalier Condenser Microphone |
Transducer Type | Pre-Polarized Condenser |
Frequency Response | 40 Hz – 20 kHz |
Polar Pattern | Cardioid / Omni |
Output Impedance | 200 ohms |
Sensitivity | 6 mV (C) / Pa @ 1k 8 mV (O) / Pa @ 1k |
Equivalent Noise Level | < 31 / 30 dB (A-Weighted) |
Signal to Noise Ratio | > 63 / 64 dB |
Dynamic Range | 99 dB / 130 dB |
Maximum SPL | > 130 / > 134 dB |
Power Requirements | 9-48 V Phantom Power |
Cable / Connector | Shielded 3’ (L5) terminating to a miniature 3 pin XLRf connector |
Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector |
Materials / Finish | Machined Brass / Black Finish |
Weight | 13 g / 0.47 oz |
Length | 23 mm / 0.91 in |