Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenEs gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: BAE 10DCF
Specification | |
Type | Compressor/Limiter |
Frequency Response | 5Hz to 45kHz -1dB Measured at +8dBu |
Noise | -80dBu with 200ohms source |
Maximum Output Level | +33dBu into 10kΩ |
+27dBU into 600Ω | |
Compressor | Threshold: -20dBu to +16dBu with 2dB steps |
Ratio: 1.5:1 to 10:1 with 6 position switch | |
Attack: 2mS to 80mS with 6 position switch | |
Recovery: 100, 200, 400, 800mS | |
Auto 1 100mS isolated peaks, 2 Sec prolonged levels | |
Auto 2 50mS isolated peaks, 5 Sec prolonged levels | |
Limiter | Threshold +4dBu to +15dBu with 0.5 dB steps |
Attack: Slow 4mS, Fast 2mS | |
Recovery: 100, 200, 400, 800mS | |
Auto 1 100mS isolated peaks, 2 Sec prolonged levels | |
Auto 2 50mS isolated peaks, 5 Sec prolonged levels | |
Bypass Filter | 50, 80,160 and 300 Hz |
Gain Make-up | 0 to +20dBu in 1 dB steps |
Output Impedance | 100Ω Balanced earth free |
Power Consumption | 200mA at 24VDC |
Dimensions in Inches | 19W x 1.75L x 9D |