Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Amadeus ML 12 D
ACOUSTICAL SPECIFICATIONS | |
Operating frequency range | 40 Hz – 105 Hz |
Maximum SPL | 127 dB |
Presets | 99 user-definable presets |
TECHNICAL SPECIFICATIONS | |
Transducer (LF) | 1 x 12 |
RMS capacity (LF) | 1500 W @ 8 Ω, Class-D |
Crossover type | DSP |
Crossover frequencies | ButterWorth 24 @ 40 Hz |
Linkwitz-Riley 24 @ 105 Hz (adjustable by preset) | |
AUDIO PERFORMANCE | |
THD + N 20 Hz – 20 kHz for 1 W | < 0.05 % |
THD + N at 1 kHz and 1 dB below clipping | < 0.04 % |
Input impedance | Balanced > 10kΩ |
Processing | 64-bit floating-point processing resolution |
A to D conversion | 24 bit |
Internal sample rate | 96 kHz |
Formats (AES/EBU) | 24 bit |
LOUDSPEAKER PROCESSING | |
Crossover | Multiple filter types (Butterworth, Linkwitz-Riley, Bell, High Shelf, Low Shelf, Notch, All Pass, Band Pass, High Pass, Low Pass) up to 24 dB/Oct. |
Delay | 1 second |
Control and monitoring interface | Full configuration and real-time monitoring via PC, Mac and iPad |
CONNECTORS AND BUTTONS | |
Input connectors (Analog) | 1 x Male XLR (Pin 2+, Pin 3-), 1 x Female XLR (Pin 2+, Pin 3-) |
Input connectors (AES/EBU) | 1 x Male XLR (Pin 2+, Pin 3-), 1 x Female XLR (Pin 2+, Pin 3-) |
Input connectors (Dante) | Full configuration and real-time monitoring via PC, Mac and iPad |
Mains connectors | 2 x powerCON |
Buttons | Power, Up, Down |
Encoder | Adjust, Set |
PHYSICAL SPECIFICATIONS | |
Height | 16.33 in (415 mm) |
Width | 15.27 in (388 mm) |
Depth | 21.61 in (549 mm) |
Weight | 68.89 lbs (31.25 kg) |
Rigging | 1 screw receptacle for satellite pole |