Revox ist 2003 stolze 75 Jahre alt geworden. Alleine das ist schon Grund zum Feiern. Aber Revox hat auch ein besonderes Angebot für Fans, man kann gewissermaßen Mitglied in einem sehr exklusiven Club werden.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Phono Vorverstärker
Ausstattungsliste: Parasound JC 3 Jr.
Specification | |
Frequency Response | 20-20Khz, +/- 0.2dB |
Total Harmonic Distortion | < 0.02% at 1 kHz |
Signal to Noise Ratio, 40 dB Setting | >85dB, input shorted, IHF A-weighted |
>80dB, input shorted, unweighted | |
Signal to Noise Ratio, 50 dB Setting | >89dB, input shorted, IHF A-weighted |
>84dB, input shorted unweighted | |
Signal to Noise Ratio, 60 dB Setting | > 94dB, input shorted, IHF A-weighted |
> 91dB, input shorted, unweighted | |
Inter-channel Crosstalk | >80 dB at 1 kHz |
Input Impedance | MM or MI: 47k Ω |
MC Variable: 50- 550 Ω | |
Output Impedance | Unbalanced: < 100 Ω |
Balanced: < 100 Ω per leg | |
Input Capacitance | 150 pF |
Input Sensitivity at 1 kHz, 4mV Input | 40 dB: 4 mV for 450mV output |
50 dB: 4 mV for 1.4 Volts output | |
60 dB: 4 mV for 4.25 Volts output | |
Input Sensitivity at 1 kHz, 1V Output | 40 dB: 9 mV for 1.0 Volt output |
50 dB: 3 mV for 1.0 Volt output | |
60 dB: 0.9 mV for 1.0 Volt output | |
Total Gain | 40 dB / 50 dB / 60 dB (unbalanced output) |
46 dB / 56 dB / 66 dB (balanced output) | |
XLR Pin Identification | 1 = Ground (Shield) |
2 = Positive | |
3 = Negative (Return) | |
AC Power Requirement | Standby: <1 watt |
Power On: 9 watts | |
115 VAC or 230 VAC 50 - 60 Hz | |
Dimensions | Width: 17-1/4” (437mm) |
Depth: 14-3/4” (375mm) | |
Depth with cables: 17” (432mm) | Height: 2-1/2” (63.5mm) |
Height, without feet: 1-3/4” (45mm) | |
Weight Net | 13 lbs. (5.9 Kg) |