Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenVon Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: D/A-Wandler
Ausstattungsliste: Audioengine D2 24-bit
Technical specification | |
DAC type | Dual Mode USB and Optical (SPDIF) wireless DAC |
Inputs | USB/Optical (SPDIF) |
Outputs | RCA Stereo/Optical (SPDIF) |
D/A converter | PCM1792A |
Optical receiver | AK4117 |
USB controller | TI1020B |
Full-scale output | 2.0V RMS |
Output impedance | 100 ohms |
Power source | Sender: USB 5V or included external supply |
Receiver: Included external supply | |
Power requirements | Sender: 270mA, 5V |
Receiver: 300mA, 5V | |
USB power filtering | 3-stage redundant regulation |
SNR | (DC to 20 kHz) >115dB |
THD+N | THD+N (1kHz FS 96kS/s) <0.0015% |
Crosstalk | -85db |
Frequency response | 10Hz-30KHz (+/- 0.5dB) |
Input bit depth | up to 24 bits |
Input data rate | up to 192KS/s |
USB device class | type 1.1 or above |
Wireless range (typical) | >100ft |
Latency | <20ms |
Receivers supported | Up to 3 |
Product dimensions | 4.75x5.5x1" |
Shipping weight | 4lbs (2.0kg) |
Environmental | Operating Temperature: 32 to 95 degrees F |
Non-operating Temp: -4 to 113 degrees F | |
Relative Humidity: 5% to 95% non-condensing | |
Included accessories (D2 Sender) | USB cable, 2ft |
Power adapter with detachable AC cord | |
Microfiber bag | |
Included accessories (D2 Receiver) | RCA cable, 6.5ft |
Power adapter with detachable AC cord | |
Microfiber bag | |
Setup Guide |