Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenEs gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Vorverstärker
Ausstattungsliste: Ayre KX-5 Twenty
Features | |
Ayre’s Diamond output stage | |
Variable Gain Transimpedance (VGT) volume circuit | |
Ayre’s exclusive Equilock circuit | |
46 step volume control, each of 1.5 dB | |
Linear analog power supply | |
zero-feedback and fully-balanced discrete circuitry | |
High-speed circuit board material | |
Input ground switching for true source isolation | |
Six inputs: four balanced, two single-ended | |
Ayre Conditioner power line RFI filter | |
AyreLink communication system | |
Specification | |
Maximum Input Level | 8 V rms – unbalanced inputs |
16 V rms – balanced inputs | |
Gain | Gain Variable to match the required output level of the system without the need for attenuation. |
Input Impedance | 1 MΩ unbalanced inputs |
2 MΩ balanced inputs (1 MΩ per phase) | |
XLR Input Polarity | Pin 1 = Ground |
Pin 2 = Non-inverting (Positive) | |
Pin 3 = Inverting (Negative) | |
Frequency Response | DC – 250 kHz |
Power Consumption | 40 watts in operating mode |
60 watts in operating mode (volume control active) | |
Dimensions | 17.25″ W x 13.25″ D x 3.75″ H (44cm x 34cm x 10cm) |
Weight | 23 pounds (10.5 kg) |
34-1185
LINE High-Fidelity |