Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenVon Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Röhrenverstärker
Ausstattungsliste: Cary Audio SLP 05
Specifications | |
Circuit Type | Class A Triode Vacuum Tube Preamplifier Design |
Output Voltage | 2 volts rated, 12 Volts maximum |
Overall Gain | 17 dB - Single-ended RCA |
24 dB - Balanced Operation | |
Rated Distortion | 0.03 % THD |
Noise and Hum | -90 dB below full output |
Input Impedance | 50,000 Ohms - RCA |
100,000 Ohms - XLR | |
Output Impedance | 400 Ohms |
Frequency Response | 5 Hz to 250,000 Hz |
Vacuum Tubes | 8 ea - 6SN7 octal tubes for the balanced, headphone and gain stages |
1 ea - 5AR4 Rectifier Tube in Power Supply | |
Power Transformer(s) | R CORE 200% Duty Cycle |
Resistors | 1% Metal Film |
Capacitors | Polystyrene, Film and Foil |
Power Supply Capacitors | 2 ea - 560µF @ 400 VDC |
AC Cord | 3 Conductor, Detachable |
AC Power Requirements | 117 or 234 Volts AC @ 50 or 60 Hz |
Consumption | 75 watts - Operation |
25 watts - Standby | |
Warm-Up Time | 3 Minutes |
Break-In Time | 100 hours of playing time |
Finish | Silver color anodized solid aluminum faceplate and a Jaguar |
Features | Remote volume control and muting |
One Cinema Bypass | |
One tape monitor loop | |
One XLR balanced stereo input | |
Three RCA stereo inputs | |
One XLR balanced and two RCA pairs of preamplifier outputs | |
Weight | 16 lbs - preamplifier |
19 lbs - external power supply | |
Dimensions | 6.25" H x 17" W x 12" D - preamplifier |
4.5" H x 17" W x 12" D - power supply |