Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenEs gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Endstufen
Ausstattungsliste: Classé Delta STEREO
Specifications | |
OVERALL DIMENSIONS | |
Width | 17.50 in (444 mm) |
Depth | 19.37 in (492 mm) |
Height | 8.74 in (222 mm) |
WEIGHT | |
Gross Weight | 116.4 lbs (52.8 kg) |
Net Weight | 102.3 lbs (46.4 kg) |
GENERAL | |
Frequency Response (-3dB, 50Ω source impedance) | 1Hz – 650kHz |
Continuous Output Power (at 1kHz, 0.1% THD+N) | 12.5W / 8Ω delivered in pure class A operation |
250W / 8Ω | |
500W / 4Ω (with AC line held constant) | |
350W / 2Ω (with AC line held constant) | |
Harmonic Distortion (measurement bandwidth: 500kHz, 25Vrms in 4Ω or 8 Ω) | <0.0016% at 1kHz |
<0.002% at 10kHz | |
<0.003% at 20kHz | |
Harmonic Distortion (measurement bandwidth: 90kHz, 25Vrms in 4Ω or 8 Ω) | <0.0007% at 1kHz |
<0.001% at 10kHz | |
<0.0025% at 20kHz | |
Peak Output Voltage (nominal AC line) | 129Vp-p into 8Ω |
138Vp-p no load | |
Input Impedance (at 1kHz, BAL / SE) | 82kΩ |
Voltage Gain (at 1kHz, BAL / SE) | 29dB |
Intermodulation Distortion (SMPTE 4:1) (8Ω or 4Ω, BAL / SE) | <0.0018% |
Intermodulation Distortion (CCIF) (8Ω or 4Ω, BAL / SE) | <0.004% |
Signal-to-Noise Ratio (A wtd in parenthesis) (22kHz BW) | 118dB (120dBA) |
Crosstalk (one channel driven to 250W / 8Ω) | 124dB (100Hz) |
107dB (1kHz) | |
90dB (10kHz) | |
Slew Rate | 75V / μs |
Output Impedance | 0.009Ω (100Hz) |
0.009Ω (1kHz) | |
0.012Ω (10kHz) | |
Damping Factor (at 1kHz, ref 8Ω) | 850 |