Revox ist 2003 stolze 75 Jahre alt geworden. Alleine das ist schon Grund zum Feiern. Aber Revox hat auch ein besonderes Angebot für Fans, man kann gewissermaßen Mitglied in einem sehr exklusiven Club werden.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Vorverstärker
Ausstattungsliste: CH Precision L1
Analog inputs | |
Inputs type | 4x Balanced XLR (8x in extended monaural configuration) |
2x Single-Ended RCA (4x in extended monaural configuration) | |
2x Single-Ended BNC (4x in extended monaural configuration) | |
Input impedance | Balanced (XLR): 100kΩ or 600Ω |
Single-Ended (RCA and BNC): 50kΩ or 300Ω | |
Maximum input level | Balanced (XLR): 16V RMS |
Single-Ended (RCA and BNC): 8V RMS | |
Analog outputs | |
Frequency response | DC - 1MHz |
Total Harmonic Distortion + Noise | < 0.001%, 1kHz, unity gain |
Signal to Noise Ratio | 130dB, unity gain and at maximum input level |
Volume control | |
Topology | 20bit R-2R resistor ladder network |
Range | 118dB range in 0.5dB steps, from -100dB to +18dB |
General | |
Display | 480x272 pixels, 24bits color, AMOLED |
Mains operation | Selectable 100V, 115, 230V AC, 47-63Hz |
Power supply consumption | <1W (standby), 100W max in operation |
Dimensions/Weight | 440 x 440 x 133mm (W x D x H), 20kg |
Remote control | IR remote control provided, RC5 codes |
Ethernet based system control via the Android CH Control App |