Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenEs gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Röhrenverstärker
Ausstattungsliste: Luxman MQ-300
Specification | |
Rated output | 8W + 8W (4Ω, 8Ω,16Ω) |
Input sensitivity | 490mV (8Ω) |
Input impedance | 240kΩ |
Frequency response | 20Hz to 20kHz (+0.3,-1.5dB) |
10Hz to 30kHz (+0.3, -3.0dB) | |
Total harmonic distortion | 1% (1kHz, 8Ω, 1W) |
S/N ratio (IHF-A) | 105dB |
Circuiting system | Driver: Parallel connection two stage amplification Output: Single configuration, cathod-bias circuit Whole: Non-feedback amplification |
Vacuum tubes | 5AR4(SOVTEK) x 2 |
6SN7GTB(TUNG-SOL) x 4 | |
TA-300B(Takatsuki) x 2 | |
Power voltage | 230V~(50Hz) / 115V~(60Hz) |
Power consumption | 190W |
190W (at no input) | |
External dimensions | 460(W) x 237(H) x 340(D) mm rear side terminal of 36mm included in depth |
Net weight | 29.0kg (main unit) |
Accessories | Power cable |
Speaker terminal Supported Y-lug terminal dimension | Width of part a: 16mm or less |
Width of part b: 7mm or more | |
Connection may not be performed depending on the shape of the Y-lug terminal. |