Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenRevox ist 2003 stolze 75 Jahre alt geworden. Alleine das ist schon Grund zum Feiern. Aber Revox hat auch ein besonderes Angebot für Fans, man kann gewissermaßen Mitglied in einem sehr exklusiven Club werden.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Millennia LOCi
Specification | |
Type | Analog Legacy Phonograph Playback System |
PHONOGRAPHIC PREAMPLIFIER & GENERAL | |
Input Amplifier Signal Path | All Discrete J-FET True Differential Gain Amplifier (IMA-01) |
EQ Amplifier Signal Path | All Discrete 50V J-FET Servo (FSA-03) |
Frequency Response, +/- 0.5 dB | 10 Hz to 100 kHz, comps & filters out, + 45 dB gain |
Common Mode Rejection Ratio | -75 dBu typical, 10 Hz - 50 kHz, 1.0V P/P CM |
Maximum Input / Maximum Output | +23 dBu flat / + 26 dBu RIAA in |
Maximum System Gain | 60 dB Nominal. Higher upon request. |
Phono Input Impedance | User selectable. Factory Stock: 47.5k ohms & 270 pF |
Output Impedance | 49.9 ohms |
Broadband Noise (no weighting filters) | Better than -125 dBu EIN, flat. -98 dBu EIN, RIAA in |
Three-pin XLR Polarity | Pin 2 = positive polarity, Pin 1 = ground |
PHONOGRAPHIC COMPENSATION & CORRECTIVE FILTERS | |
Maximum Filter Boost & Cut | +/- 10 dB (21 step detented) |
Notch Filter "Q" (Quality Factor) | Q = 1.0 |
Low Frequency Compensation (Hz) | 200, 250, 300, 400, 500/RIAA, 700/USER |
High Frequency Compensation (dB @ 10 kHz) | -5.0, -7.0, -9.5, -11.5, -13.7/RIAA, -16.0/USER |
Low Filter Fixed Frequencies (Hz) | 20, 35, 60, 100, 180, 260 |
High Filter Fixed Frequencies (kHz) | 1.0, 2.0, 3.0, 5.0, 8.0, 12.0 |
Peak/Shelf Selection on all Filters | Yes (4) |
Bypass Selection on all Bands | Yes (8) |
ELECTRO-MECHANICAL | |
Power Consumption | 60 Watts, nominal |
Power Requirements | 100VAC to 240VAC, 50/60Hz, user selectable |
Fuses (external, 2 required) | 2 ea. 1.0A with 100-120VAC mains (5x20mm) |
2 ea. 500 mA with 200-240VAC mains (5x20mm) | |
Internal Power | +/-50VDC +/-25VDC +5VDC |
Dimensions | 19.0” W x 15.0" D x 3.5" H (2u rack mount) |
Net Weight | approximately 26 pounds |