390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigen
379_21926_2
Topthema: Die ewige Legende
Harwood Acoustics LS3/5A
Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Kind DD+5000
Ausstattung & technische Daten
| General | |
| Number of amplifier channels | 2 |
| Total burst power all channels | 5000 W |
| Max output power single channel EIAJ test standard, 1 kHz, 1% THD | |
| 2 ohms | 2500 W |
| 4 ohms | 1850 W |
| 8 ohms | 1050 W |
| Hi-Z 70 V (note 1) | - |
| Hi-Z 100 V (note 1) | - |
| Max output power bridged EIAJ test standard, 1 kHz, 1% THD | |
| 4 ohms | 5000 W |
| 8 ohms | 3700 W |
| Max output votage / current | 137 V / 50 A |
| Protection features | Short Circuit Protection, Current-Clip Limiter, Voltage Clip Limiter, Temperature protection |
| Amplifier audio performance | |
| Gain, selectable | 26 dB, 29 dB, 32 dB (factory set), 35 dB, 38 dB, 41dB, 44 dB |
| Input sensitivity @ 4 ohms | 2.16 V |
| Max input level | 20 dBu |
| Frequency response | 20 Hz - 20 kHz (1 W @ 8 Ohm - +/- 0.5dB) |
| S/N ratio (20 Hz - 20 kHz) | >104 dBA |
| Output circuitry | Class D |
| Input impedance | 10k balanced |
| THD+N | <0.3% from 1W to 0.5dB below clip (typically <0.1%) |
| Front panel | |
| Indicators | (LED) Active, Protect, Hi temp, DSP option, signal out -35 dB, -20 dB, -10 dB, Limiter |
| Controls | Mains switch, Gain control (per channel) |
| Maintenance | Removable dust filter holder |
| Rear panel | |
| Audio signal input connectors (per channel) | XLR male, XLR female combo jack 6.3 (balanced) |
| Loudspeakers output connectors | Neutrik Speakon NL4MD (per channel) |
| Networking | Data port hole for DSP option |
| AC mains cordset / chassis connector | Schuko CEE 7/7 16 A / Direct |
| Controls | (switch) Gain, HPF, Link/Bridge, Analog or AES3 |
| AC mains power | |
| Power supply | Universal regulated switch mode with PFC (Power Factor Correction) |
| Operating voltage | 100-240 V +/-10%, 50-60 Hz |
| Power factor correction | >0.95 @ mains power >500 W |
| Current draw | @ 230 V / @ 115 V |
| Idle | 0.6 A / 0.7 A |
| 1/8 of max output power@ 4 ohms | 3.1 A / 5.7 A |
| 1/4 of max output power@ 4 ohms | 5.6 A / 10.8 A |
| Thermal | Operating temperature 0° - 40° C / 32° - 104° F |
| Dissipation and cooling | Fan, continuosly variable speed, temperature and load current controlled, front to rear airflow |
| Idle | 220 BTU/h | 55 kcal/h |
| 1/8 of max output power@ 4 ohms | 614 BTU/h | 155 kcal/h |
| 1/4 of max output power@ 4 ohms | 1008 BTU/h | 254 kcal/h |
| Chassis construction | 1.2 mm steel chassis with added 1.5mm steel front pannel and removable dust filter holder with rear support ears |
| Dimensions | W 483 mm / 19", H 89 mm / 2 RU, D 455 mm / 17.9" from front mounting rails |
| Weight | 10 kg / 22lb |
