Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenEs gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: dbx DriveRack PA2
Specifications | |
Type | Complete Loudspeaker Management System |
Input | (2) line inputs. (1) RTA Mic input |
Input Connectors | (2) Female XLR line inputs. (1) Female XLR RTA Mic input |
Input Type | Electronically balanced/RF filtered |
Input Impedance | >50 kohm |
A/D Converter | dbx Type IV™ Conversion System |
CMRR | > 45dB |
Mic Preamp Phantom Power | +15VDC (RTA) |
Mic Preamp Equivalent Input Noise (EIN) | < -117dB, 22Hz-22kHz, 150 ohm (RTA) |
Output | (6) Line Outputs |
Output Connectors | Male XLR |
Output Type | Electronically balanced, RF filtered |
Output Impedance | 120 Ω |
Max Output | +20dBu |
A/D Dynamic Range | 112 dB A-weighted, 110 dB unweighted |
Type IV Dynamic Range | 123 dB with transient material, A-weighted, 22kHz BW; 121 dB with transient material, unweighted, 22kHz BW; 115 dB typical with program material, A-weighted, 22kHz BW |
Input Delay Length | 100ms |
Alignment Delay | 10ms per channel (60ms total) |
Sample Rate | 48kHz |
Dynamic Range | >110 dB A-weighted, >107dB unweighted |
THD+Noise | 0.003% typical at +4dBu, 1kHz, 0dB input gain |
Frequency Response | 20Hz – 20kHz, +/- 0.5dB |
Interchannel Crosstalk | < -110 dB, -120dB typical (input-to-output: < -100 dB) |
Operating Voltage | 100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz |
Power Consumption | 22 W |
D/A Dynamic Range | 112 dB A-weighted, 110dB unweighted |
Unit Weight | 5.25 lbs. (2.4 kg) |
Dimensions | 1.75” (H) x 5.75” (D) x 19” (W), 4.4cm (H) x 14.6cm (D) x 48.26cm (W) |