Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigen
Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Yamaha 01V96i
| Type | Digitalmischpult |
| Outline | |
| Mixing capability | |
| Mixing channels | 32 Mono + 4 Stereo |
| GROUP | 8 |
| AUX | 8 |
| MAIN | Stereo |
| Input channel functions | Gate, Attenuator, 4-band PEQ, 2x Compressor, Delay, Pan |
| Output channel functions | Attenuator, 4-band PEQ, Compressor, Delay |
| On-board processors | 4x SPX multi effectors |
| I/O | |
| Mic inputs | 12 |
| Phantom power | +48V DC; ON/OFF per 4ch Line inputs |
| Line inputs | 2x Stereo, 2x 2tr in |
| AD converter | 24-bit; 128-time over sampling |
| Line outputs | Stereo output, Monitor output, 4x Omni output |
| DA converter | 24-bit; 128-time over sampling |
| Digital I/O | ADAT (8-in/8-out), 2tr in/out |
| Expansion slots | Mini-YGDAI (16-in/16-out) |
| Control and others | To Host(USB), MIDI, Word clock I/O |
| General specifications | |
| Internal processing | 32bit, Accumulator: 58bit |
| Sampling frequency rate | Internal 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz |
| External 44.1kHz/88.2kHz (-10%) - 48kHz/96kHz (+6%) | |
| Signal delay | Less than 1.6ms CH INPUT to STEREO OUT (@SampIing frequency = 48kHz) / Less than 0.8ms CH INPUT to STEREO OUT (@SampIing frequency = 96kHz) |
| Total harmonic distortion | CH INPUT to STEREO OUT: Less than 0.05%, 20Hz to 20kHz @+14dBu into 600Ω / Less than 0.01%, 1kHz @+24dBu into 600Ω (@SampIing frequency = 48kHz) / |
| Less than 0.05%, 20Hz to 40kHz @+14dBu into 600Ω / Less than 0.01%, 1kHz @+24dBu into 600Ω (@SampIing frequency = 96kHz) | |
| Frequency response | CH INPUT to STEREO OUT: 0.5, -1.5dB, 20Hz - 20kHz @+4dBu into 600Ω(@SampIing frequency = 48kHz) / 0.5, -1.5dB, 20Hz - 40kHz @+4dBu into 600Ω(@SampIing frequency = 96kHz) |
| Dynamic range | 110dB typ. DA Converter (STEREO OUT) / 105dB typ. AD+DA (to STEREO OUT) @fs=48kHz / 105dB typ. AD+DA (to STEREO OUT) @fs=96kHz |
| Hum & noise level | Equivalent input noise -128dBu Equivalent Input Noise. |
| Residual output noise -86dBu residual output noise. STEREO OUT: STEREO OUT off. / -86dBu (90dB S/N) STEREO OUT: STEREO fader at nominal level and all CH INPUT faders at minimum level. / | |
| -64dBu (68dB S/N) STEREO OUT: STEREO fader at nominal level and one CH INPUT fader at nominal level | |
| Crosstalk | -80dB adjacent input channels (CH1-12) / -80dB adjacent input channels (CH13-16) / -80dB input to output |
| Power requirements | AC100V, 120V, 220-240V 50/60 Hz |
| Power consumption | 90W |
| Dimensions | W 436mm; 17-1/8in |
| H 148mm; 5-7/8in D | |
| D 548mm; 21-5/8in | |
| Net weight | 14kg; 30.86lbs |
| Others | Fader: 100mm motorized x17 |
|
303-2039
Musikus Hifi |
|
318-2424
Elektrowelt 24 |
|
224-1309
Nubert electronic GmbH |
