Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKenwoods brandneue Multimedia-Headunit bringt nicht nur einen riesigen 10,1-Zoll-Bildschirm mit, sondern auch eine speziell auf Wohnmobile zugeschnittene Navigation.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Krix THEATRIX
Specification | |
Type | Cinema Loudspeaker |
Frequency Range | 38Hz-16kHz in room response |
Power Handling | 500 Watts RMS recommended maximum amplifier power |
Sensitivity | 96dB for 2.83 volts at 1 metre |
Impedance | Nominally 8 Ohms |
Configuration | 3-way |
Enclosure Type | Bass reflex, front vented |
Dimensions | Total Dimensions: 1680mm high x 565mm wide x 460mm deep |
Low Frequency Driver | Single 380mm (15″) high stiffness paper cone driver with 77mm (3″) voice coil of optimal length for increased linear excursion, wound on high temperature apical former and powerful vented magnet assembly designed for low distortion |
Mid Frequency Driver | Krix designed 90º x 40º constant directivity horn with a 3″ throat driven by a single 165mm (6½”) curvilinear paper cone driver. A 45mm (1¾”) edge-wound aluminium voice coil, |
with vented Neodymium magnet assembly and heat dissipation to minimise power compression at high sound output levels | |
High Frequency Driver | A Krix patented designed 90º x 40º short throw horn driven by a compression driver with a 1″ throat 1¾” edge-wound aluminium voice coil and Nomex former |
Crossover Point | 1600Hz passive MID/HF – contact Krix directly for bi-amped active filter parameters |
Input Terminals | 200 amp proprietary terminal posts, accepting up to 6mm diameter cable |
Weight | 64kg each |