Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Plattenspieler
Ausstattungsliste: McIntosh MT2
Cartridge Specifications | |
Cartridge Type | Moving Coil, High Output |
Output Level | 2.5 mV at 5 cm/s |
Load Impedance | 1000 Ohms recommended (Preamp MC Input) |
Frequency Response | 20Hz to 50kHz |
Channel Separation | 35dB at 1kHz |
Compliance | 15 x 10-6 cm/dyne |
Recommended Tracking Force | 2.0 g |
Channel Difference | Less than 0.5dB at 1kHz |
Total Mass | 6.3 g |
Stylus | Elliptical Diamond |
Cantilever Material | Aluminum |
Tonearm Specifications | |
Bearing | Sapphire and Ceramic |
Arm Tube | Dural-Aluminum |
Counterweight | Eccentric |
Adjustments | Vertical Tracking Angle, Antiskate, Azimuth |
Turntable Specifications | |
Playback Speeds | 33-1/3 and 45 rpm |
Motor Type | DC Motor with Stainless Steel Brushes |
Speed Control | Servo System |
Platter | Dynamically balanced polyoxymethylene (POM) |
Platter Bearing | Polished and tempered steel shaft in sintered bronze bushings |
Signal To Noise Ratio | 35dB - 40dB |
Wow & Flutter | 0.15% - 0.25% |
Connectivity | |
Stereo Outputs Unbalanced | 1 |
Control | |
Power Control Input | 0 |
Power Control Output | 0 |
Platter Light | N/A |
Speed Control Fine Adjustment | Yes |
General Specifications | |
Dust Cover Included | Yes |
Weights & Dimensions | |
Dimensions (W x H x D) | 17-13/16" (45.2cm) x 5" (12.7cm) (6" (15.2cm) with dust cover) x 17" (43.2cm) |
Note: Tone Arm Height will vary depending on the type of Cartridge installed. | |
Weight | 29 lbs (13.2 kg) |