Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenEs gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Musikserver
Ausstattungsliste: Linn Sekrit DS-I
Technical Specifications | |
Date of introduction | April 2010 (original model released October 2009) |
Type | integrated ds player, pre-amplifier and power amplifier |
Dimensions (without feet) | (H) 80 mm x (W) 190 mm x (D) 346 mm (H) 3.15 inches x (W) 7.5 inches x (D)13.6 inches |
Rrack height | 2u (fits two units side-by-side in 19 inch rack) |
Weight | 2.6 kg / 5.7 lb |
Mains supply voltage (auto ranging) | 100 – 120 V ac (±10%) 50 – 60 hz, 200 – 240 V ac (±10%) 50 – 60 hz |
Fuse | 250 V, t1.6 a (not user replaceable) |
Power consumption | standby < 20 W maximum continuous 400 W |
supported file types | FLACflac, ALAC alac, WAaV, MP3, WMA a (except lossless), AIFF aiff, AACaac, OGG |
Audio sample rates | 7.35 k, 8 k, 11.025 k, 12 k, 14.7 k, 16 k, 22.05 k, 24 k, 29.4 k, 32 k, 44.1 k, 48 k, 88.2 k, 96 k, 176.4 k, 192 k |
Word depths | 16 – 24 bits |
control protocol | compatible with uPnP™ media servers, UuPnP™ aV 1.0 control points |
local control | ir remote controllable (handset supplied separately) |
Back Panel Connectors | |
Analog audio | line in (L+R) RCA phono, line out (L+R) RCA phono |
Digital Audio | sPDIF Idif in rca phono Optical in TtOSLINslinK |
Sspeaker outputs | 4 mm banana/binding post/spade |
control | ethernet 100Base-RJ45 RS 232 RJ11 (for proxy control of connected linn products only) ir flasher 3.5 mm jack (x2) RC rc5 accessory port RJ45 (for control by linn Basik 3 RCU ) |
Input/Output Electrical | |
Analog line inputs | Max input voltage 2.5 V rMSs, 3.5 V peak input impedance 10 kΩ |
SPDIF dif digital input | Max input voltage 3 V peak input impedance 75 Ω |
Analog line outputs | Max output voltage 1.8 V rMSs, 2.5 V peak (0 dBFS fs @ vol. 85) Output impedance 300 Ω DC dc offset voltage < 5 mV |
Sspeaker outputs | Max output voltage 30 V peak dc offset voltage < 20 mV |
Audio Performance | |
Line inputs | thd+Nn < 0.005 % D dynamik range 110 dB signal to noise ratio 110 dB frequency range 5 hz - 23 kHhz |
Line outputs | thd+< 0.005 % dynamik range 105 dB signal to noise ratio 105 dB frequency range 0 hz - 30 kHhz |
Power amplifier | Power output 70 W rMS s per channel into 4 Ω thd+Nn < 0.01 % (1 kHhz, 10W rMS s into 4 Ω) dynamic range 95 dB signal to noise ratio 95 dB channel balance < ± 0.2 dB |
channel separation > 75 dB (1 kHz into 4 Ω) damping factor > 90 - 25 kHz (-3 dB into 4 Ω) frequency response 6 hz - 25 kHz (-3 dB into 4 Ω) Gain 23.6 dB (relative to line out) | |
Digital pre-amplifier | Gain range - 80 dB to + 20 dB Gain resolution 1 dB unity gain volume 0 dB = vol. 80 line input scaling 0 dBFS = 2.5 V RMS line output scaling 0 dBFS = 1 V RMS |
speaker output voltage | 15 V peak |
speaker output power | 20 W into 4 ΩW |