Kategorie: Lautsprecherchassis Tiefmitteltöner
Ausstattungsliste: Scanspeak Classic 18W/8545-00
Ausstattung & technische Daten
| KEY FEATURES | |
| Patented Symmetrical Drive motor design | |
| Air Dried Paper/Carbon Fibre Cone | |
| 42mm Voice Coil w. Alu foil | |
| Low-Loss linear suspension | |
| Low Damping SBR Rubber Surround | |
| T-S Parameters | |
| Resonance frequency [fs] | 28 Hz |
| Mechanical Q factor [Qms] | 2.30 |
| Electrical Q factor [Qes] | 0.30 |
| Total Q factor [Qts] | 0.27 |
| Force factor [Bl] | 8 Tm |
| Mechanical resistance [Rms] | 1.53 kg/s |
| Moving mass [Mms] | 20 g |
| Suspension compliance [Cms] | 1.62 mm/N |
| Effective diaph. diameter [D] | 136 mm |
| Effective piston area [Sd] | 145 cm² |
| Equivalent volume [Vas] | 47.6 l |
| Sensitivity (2.83V/1m) | 88 dB |
| Ratio Bl/√Re | 3.41 N/√W |
| Ratio fs/Qts | 106 Hz |
| Electrical Data | |
| Nominal impedance [Zn] | 8 Ohm |
| Minimum impedance [Zmin] | 6.6 Ohm |
| Maximum impedance [Zo] | 47.7 Ohm |
| DC resistance [Re] | 5.5 Ohm |
| Voice coil inductance [Le] | 0.4 mH |
| Power Handling | |
| 100h RMS noise test (IEC 17.1) | 100 W |
| Long-term max power (IEC 17.3) | - |
| Voice Coil and Magnet Data | |
| Voice coil diameter25 | 42 mm |
| Voice coil height | 19 mm |
| Voice coil layers | 2 |
| Height of gap | 6 mm |
| Linear excursion | ± 6.5 mm |
| Max mech. excursion | ±10 mm |
| Unit weight | 2.3 kg |
Top Händler
|
323-2545
Masori |
