Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Stereo
Ausstattungsliste: Tannoy Kensington GR
Specification | |
PERFORMANCE | |
Recommended amplifier power | 20 - 250 Watts |
Continuous power handling | 125 Watts RMS |
Peak power handling | 500 watt |
Sensitivity | 93 dB (2.83 Volts @1 metre) |
Nominal impedance | 8 Ohms |
Minimum Impedance | 5 ohm |
Frequency Response | 29 Hz - 27 kHz (-6 dB) |
Dispersion | 90 degrees conical |
DRIVE UNITS | |
Dual Concentric™ high frequency | 52 mm (2.00") 52 mm (2”) aluminium/magnesium alloy dome with round voice coil |
Dual Concentric™ low frequency | 250 mm (10”) with paper pulp cone and twin roll impregnated fabric surround.52 mm (2”) round wire voice coil |
CROSSOVER | |
Frequency | 1.1kHz |
Type | Bi-wired, hard-wired passive, low loss. Time compensated.2nd order low pass. 2nd order high pass. Deep cryogenically treated |
Adjustment | /- 3 dB over 1 kHz to 27 kHz shelving, 2 dB to -6 dB per octave over 5 kHz to 27 kHz slope |
CONSTRUCTION | |
Enclosure type | Distributed Port |
Volume | 105L (3.7 cu.ft) |
Dimensions | 1100 x 406 x 338mm (43.50 x 16.00 x 13.33" ) |
Finish | Particle board with high density birch ply baffle and rear panel, 18 mm (0.71”) thickness. Internally cross braced and heavily damped. |
305-2128
MD Sound GmbH & Co. KG |