379_21926_2
Topthema: Die ewige Legende
Harwood Acoustics LS3/5A
Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigen
390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Stereo
Ausstattungsliste: Russell K RED 120
Ausstattung & technische Daten
| Cabinet | |
| Dimensions H- 860mm (910mm including plinth, base and spikes) W-200mm D-190mm | |
| Construction 16mm MDF all sides apart from front baffle which is 19mm. | |
| Totally undamped cabinet | |
| 3 acoustic loading bracing shelves with multiple apertures, mounted below the tweeter, below the bass mid driver and below the sub bass driver | |
| 1 bracing shelf mounted near the bottom of the enclosure containing an internal port | |
| Internal port vents into a small chamber containing a second reflex port tuned as a system to 24Hz | |
| Drive units | |
| 2 x 5” Bass units with impregnated paper cone and curved optimised acoustic profile | |
| High power Ferrite magnet driving a 25mm voice coil with aluminium former and Faraday distortion cancelling copper ring | |
| 25mm soft dome tweeter | |
| Double Ferrite magnet system | |
| Copper Clad Aluminium voice coil wire on a Fibreglass Former and Faraday distortion cancelling copper ring | |
| Crossover | |
| All drivers connected in positive phase | |
| Sub bass driver starts roll off at 80Hz 6db/Oct fed by “Enclosed Field Iron Core Inductor”. Features high power without saturation, very low DCR and almost no stray magnetic field | |
| Bass/Mid driver crossover frequency 2200Hz nominal 12 db/Oct. Utilises an “Enclosed Field Ferrite Core Inductor “in the signal path. Very low DCR nominal stray fields | |
| Tweeter attenuation by misaligned Zobel network as opposed to conventional L-Pad | |
| All Drivers have only one component in the signal path | |
| Phase optimised through the crossover region | |
| In room usable frequency response 25Hz-22KHz (dependent on room) | |
| Sensitivity: 86db 1 watt 1 Metre | |
