390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigen
462_22882_2
Topthema: Feurig
High-End-Standbox mit ESS AMT
Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Tannoy CMS 503ICT
Ausstattung & technische Daten
| Specification | |
| SYSTEM | |
| Frequency Response (-3 dB) (1) BM Backcan | 85 Hz - 22 kHz |
| Frequency Range (-10 dB) (1) BM backcan model | 74 Hz - 24 kHz |
| Frequency Range (-10dB) (1) PI fitted with backcan | 71 Hz - 24 kHz |
| System Sensitivity (1W @ 1m) (2) | 89 dB (1 W = 4 V for 16 Ohms) |
| Nominal Coverage Angle | 90 degrees conical |
| Coverage Angle (1 kHz to 6 kHz) | 105 degrees |
| Directivity Factor (Q) | 5.6 averaged 1 kHz to 6 kHz |
| Directivity Index (DI) | 7.0 averaged 1 kHz to 6 kHz |
| Power Handling (3) | Average: 50 W |
| Programme: 100 W | |
| Peak: 200 W | |
| Recommended Amplifier Power | 100 W @ 16 ohms |
| Nominal Impedance (Lo, Z) | 16 Ohms |
| Rated Maximum SPL | Average: 106 dB |
| Peak: 112 dB | |
| Transformer Taps (via front rotary switch) | 70 V: 30 W (165 O) / 15 W (330 O) / 7.5 W (660 O) / 3.75 W (1320 O) / OFF & low impedance operation |
| 100 V: 30 W (330 O) / 15 W (660 O) / 7.5 W (1320 O) / OFF & low impedance operation | |
| Crossover | 7 kHz inductively coupled |
| TRANSDUCERS | |
| Low Frequency | 130 mm (5.00”) mineral loaded polypropylene |
| High Frequency | ICT aluminium dome |
| PHYSICAL | |
| Enclosure | Backcan: Zinc plated steel |
| Baffle: Reflex loaded UL 94V-0 rated ABS | |
| Grille: Steel, with weather resistant coating | |
| Safety Features | Safety ring located at rear of enclosure for load bearing safety bond |
| Clamping Design | Security toggle clamp |
| Blind Mount (BM) | Complete with fixed backcan |
| Pre Install (PI) | Separate backcan for pre-installation |
| Cable Entry Options | Cable clamp & squeeze connector for conduit up to 22 mm |
| Conduit Knockouts on PI Backcan | 3 Sets of horizontal positions 19 / 22 / 28 mm (0.75” / 0.87” / 1.10”) |
| Connectors | Removable locking connector with screw terminals with “loop through” facility |
| Compliance | UL-1480, UL-2043, CE |
| Dimensions | |
| Bezel Diameter | 205.9 mm (8.11") |
| BM Model: Front of ceiling to rear of backcan | 188.5 mm (7.42") |
| BM Model: Front of ceiling to top of safety loop | 205.8 mm (8.10") |
| PI Model: Front of ceiling surface to rear of speaker unit | 131.8 mm (5.19") |
| PI Model: Front of accessory backcan bezel to top of safety loop | 153.5 mm (6.04") |
| Hole cutout diameter (all models) | 190 mm (7.48”) |
| Net Weight (ea) | CMS 503ICT BM 3.85 kg (8.49 lbs) |
| CMS 503ICT PI 2.85 kg (6.28 lbs) | |
| PI Backcan 2.6 kg (5.73 lbs) | |
| Included Accessories | C Ring Tile bridge Paint mask Cutout template Grille |
| Optional Accessories | Plaster (Mud) ring |
| Arco Grille | |
| Packed Quantity | 2 |
Top Händler
|
305-2128
MD Sound GmbH & Co. KG |
