Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Kopfhörerverstärker
Ausstattungsliste: Pathos Acoustics InPol Ear
Specification | |
Type | Reference stereo integrated amplifier for headphone Pure class A double INPOL technlogy -fully balanced and preamplifier |
Output power Impedance | Unbalanced 32 Ω: 3W |
Unbalanced 50 Ω: 1,9W | |
Unbalanced 120 Ω: 800mW | |
Unbalanced 300 Ω: 320mW | |
Unbalanced 600 Ω: 160mW | |
Balanced 32 Ω: 10W | |
Balanced 50 Ω: 6,4W | |
Balanced 120 Ω: 2,7W | |
Balanced 300 Ω: 1W | |
Balanced 600 Ω: 533mW | |
Output impedance | Balanced 0,9 Ohm |
Unbalanced 0,45 Ohm | |
Frequency response | 2Hz – 200KHz ± 0.5db |
Input sensitivity | 2,2 VRMS |
Input impedance | 100KOhm |
Output polarity | Selectable by remote control |
Volume regulator | 2 x Burr Brown PGA2310 (180 steps 0,5dB) |
THD | 0,1% @ 11W |
S/N Ratio | > 100dB |
Max input voltage | 4,4VRMS |
Max output voltage | Balanced 20VRMS |
Unbalanced 10VRMS | |
Preamplifier | Gain 9db |
Phase inverting/non-inverting switch | |
Outputs 1 balanced XLR,1 unbalanced RCA | |
Analog inputs | 1 Balanced XRL line |
4 unbalanced RCA line | |
Digital inputs | Installation of (optional) HiDac Mk2 board is required to enable these inputs 1 USB port type “B”, 1 SPDIF coaxial, 1 SPDIF optical |
Outputs | 1 Pre out stereo line RCA (pre-output phase can be selected) |
1 Pre out stereo line Balanced XLR | |
Power consumption | 110W |
Dimensions | 370mm (D) x 280mm (W) x 180mm (H) |
Weight | 12,5Kg |