Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenRevox ist 2003 stolze 75 Jahre alt geworden. Alleine das ist schon Grund zum Feiern. Aber Revox hat auch ein besonderes Angebot für Fans, man kann gewissermaßen Mitglied in einem sehr exklusiven Club werden.
>> Mehr erfahren>> Alle anzeigenKategorie: Kopfhörerverstärker
Ausstattungsliste: MSB The Reference Headphone Amplifier
Technical Specifications | |
Supported Formats | Analog Only |
XLR Analog Inputs | Optimized for 75Ω or 150Ω Balanced Source |
XLR Analog Outputs | Direct connection to input when enabled or unit powered off. |
When listening to headphones, output is muted with 75Ω output impedance | |
Headphone Output Impedance | 0.45Ω |
Dynamic Range 20Hz-20kHz (Max Power at 45Ω) | >139dB |
>141dBA | |
Frequency Response | 5Hz-20kHz ±0.016dB |
Common Mode Rejection Ratio | > 95dB CMRR @ 60Hz |
> 95dB CMRR @ 1kHz | |
> 80dB CMRR @ 20kHz | |
Crosstalk | > 130dB Crosstalk @ 1kHz |
> 110dB Crosstalk @ 20kHz | |
SMPTE IMD 0dBu | 0.0019% @ 45Ω % |
THD+N 1kHz 0dBu | 0.00065% @ 45Ω |
Max Power @ 1% THD+N | 16Ω @ 4.25Vrms (1.12W) |
32Ω @ 8.6Vrms (2.3W) | |
45Ω @ 15.5Vrms (5.3W) | |
150Ω @ 15.6Vrms (1.62W) | |
Noise Floor (150Ω Input Impedance) | 0.00168mVrms 20Hz-20kHz |
Headphone Output Connectors | 1x Rear 4 Pin XLR |
2x Front 4 Pin XLR | |
Display | Power LED |
Controls | IR Remote (Configurable) |
Power Button (Configurable) | |
2x MSB 12V Trigger | |
Power Consumption | 64 Watts |
Less than 2W standby | |
Chassis Dimensions | Width: 17.5 in (444 mm) |
Depth: 17.5 in (444 mm) | |
Chassis Height (Without Feet): 2.2 in (79 mm) | |
Stack height: 2.85 in (92 mm) | |
Weight: 36 lbs (16 kg) | |
Included Accessories | Ground cable |
IEC power cord | |
4X Spiked feet | |
4X Plastic foot inserts |