Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenVon Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Hifi sonstiges
Ausstattungsliste: Elipson CONNECT 250
Specification | |
Type | Connect Wi-Fi Receiver |
Number of output channels | 2 |
Power (W / channel) | 4 ohms | 1 kHz | 50 W @ 1% THD+N |
Power (W / channel) | 8 ohms | 1 kHz | 30 W @ 1% THD+N |
Input Sensitivity | ~300 mV – à pleine puissance |
Maximum input voltage (RMS) | 1.5 V |
Signal to noise ratio (SNR) at THD+N <1%, f = 1 kHz, Gain = 20 dB | 102 dB |
Total Harmonic Distortion THD + N @ 1kHz | < 0.1% |
THD + N @ 1kHz | < 0.1% |
Resolution | 44.1kHz/24bit |
Bluetooth version & codec | 5.0 - SBC |
Network | Wi-Fi 2,4GHz IEEE 802.11 b/g/n - Ethernet Audio multiroom up to 10 rooms, depending on the quality of the network |
Supply voltage | 24V/5A DC |
Power consumption in standby mode | < 0.5 W |
Accessories/Particularity | Wall mount and remote infrared sensor included |
Protected Audio connectionssuitable for damp areas | |
Dimensions | Amplifier size W x H x D : 120 x 30 x 120 mm |
Power supply size W x H x D : 40 x 170 x 65 mm | |
Weight – without power supply and accessories : 240 g |