Möchten Sie zur Desktopansicht wechseln ? JaNein
260_20510_2
Topthema: Reich beschenkt
Mundorf MA 30 Final Edition
Auch, wenn der Zeitpunkt schon lange vorbei ist: Der Lautsprecher, mit dem sich Mundorf selbst zum 30-jährigen Firmenjubiläum feiert, ist auch im 32. Jahr der Firma eine spannende Angelegenheit.
231_0_3
Anzeige
Topthema: Heimisches Kinozimmer
Bequeme & bezahlbare Kino-Sofas
Die hochwertigen Sessel und Sofas von Sofanella schaffen ein gemütliches und bequemes Heimkinoerlebnis
239_20160_2
Topthema: Block SR-200 MKII
Streaming-Radio mit CD und DAB+
Das neue Smartradio Block SR-200 MKII verfügt über eingebaute Lautsprecher und einen Subwoofer, bietet zudem Musikstreaming und klingt überraschend erwachsen.
243_20305_2
Topthema: Sound unterm Sitz
Audio System US 08 Active 24V
Audio System erweitert seine Palette an Untersitzwoofern. Neben dem bekannten Aktivwoofer US 08 Active gibt es jetzt auch eine passive und eine 24-Volt-Variante.
Neu im Shop
Art Edition Schallabsorber
offerbox_1610886351.jpg
>>mehr erfahren

Kategorie: Endstufen

Ausstattungsliste: Crestron AMP-3210T

Ausstattung

 
Technische Daten
Audio
Typical of 3 mono amplifier channels:
Input Signal Type Balanced or unbalanced analog line-level
Output Signal Types 4/8 Ohm, 70 Volt, or 100 Volt
Output Power 120 Watts at 8 Ohms;
210 Watts at 4 Ohms;
420 Watts at 8 Ohms bridged (channels 1 and 2);
120 Watts at 70 or 100 Volts (Transformer isolated)
Damping Factor >100
Protection Over Current, Over/Under Voltage, Over Temperature, DC Offset
Frequency Response 20Hz to 20kHz ±0.5 dB at 4/8 Ohms;
80Hz to 20kHz +0/-3 dB at 70/100 Volts
THD 0.05% @ 1kHz, full rated power at 4/8 Ohms, 8 Ohms Bridged,
0.1% @ 20Hz to 20kHz, 120W at 8 Ohms;
0.2% @ 20Hz to 20kHz, 210W at 4 Ohms;
0.1% @ 20Hz to 20kHz, 420W at 8 Ohms Bridged;
0.1% @ 80Hz to 20kHz, 120W at 70/100 Volts
S/N Ratio >103 dB, A-weighted
Crosstalk >70 dB @ 1kHz
Gain 23 dB with INPUT LEVEL control set at 12 o
Input Sensitivity 2.22 Vrms for rated output power with INPUT LEVEL control set at 12 o
Input Detection Threshold 40 mV RMS @ 1 kHz
Input Level Adjustment ±10 dB from nominal
Connectors
6-32 screw, chassis ground lug
INPUT CH 1 – 3 (3) 3-pin 3.5mm detachable terminal blocks; Balanced/unbalanced line-level audio inputs; Input Level: 5.3 Vrms maximum with INPUT LEVEL control set at minimum position; Input Impedance: 24k Ohms balanced, 12k Ohms unbalanced
SPEAKER OUTPUT CH 1 – 3 (3) 4-pin 7.62mm 15A detachable terminal blocks; 4Ω/8Ω and 70/100V power amplifier outputs; Wire Size: Terminals accept up to 14 AWG
REMOTE (1) 6-pin 3.5mm detachable terminal block; Provides (3) remote control inputs; enables independent power control of each channel via local jumpers or remote contact closures; inputs may be safely paralleled for group or global control
FUSE T6.3AH 250V Main fuse holder; 5x20 mm, 250V, 6.3AH, time-lag, high-rupture rated
100-240V~50/60Hz (1) IEC C14 male chassis plugs, main power input; Mates with removable power cord (included)
Controls & Indicators
PWR (1) dual-color LED, green indicates ACTIVE state, yellow indicates STANDBY state
INPUT 1 – 3, SIGNAL (3) green LEDs, indicate signal presence on each corresponding channel
OUTPUT 1 – 3, CLIP (3) amber LEDs, indicate a clipping condition on each corresponding channel
OUTPUT 1 – 3, FAULT (3) red LEDs; indicate over-temperature, over-current, over or under power supply voltage, or DC offset condition on each corresponding channel
INPUT CH 1 – 3 LEVEL (rear) (3) Rotary input boost/attenuate adjustments w/center detent at nominal
SPEAKER OUTPUT CH 1 – 3, 100V / 70V / 4/8Ω (rear) (3) 3-position slide switches, select the output configuration for each corresponding channel
ON/REMOTE/OFF (rear) (1) 3-position slide switch; selects between all channels powered on, all channels powered off, or remote control of each individual channel
Power Requirements
Main Power 100-240 Volts AC, 50/60 Hz
Power Consumption 85 Watts @ 8 Ohms, all channels driven at 1/8th output power;
126 Watts @ 4 Ohms, all channels driven at 1/8th output power;
86 Watts @ 70/100V, all channels driven at 1/8th output power;
32 Watts, all channels idle;
<1 Watt in standby
Environmental
Temperature 41° to 104°F (5° to 40°C)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 137 BTU/Hr @ 8 Ohms, all channels driven at 1/8th output power;
162 BTU/Hr @ 4 Ohms, all channels driven at 1/8th output power;
140 BTU/Hr @ 70/100V, all channels driven at 1/8th output power;
110 BTU/Hr, all channels idle;
<3.4 BTU/Hr in standby
Enclosure
Chassis Metal with black finish, vented top and sides, convection cooled
Front Panel Metal, black finish with polycarbonate label overlay
Mounting Freestanding or 1U 19-inch rack-mountable (adhesive feet and rack ears included)
Dimensions
Height 1.70 in (44 mm)
Width 17.28 in (439 mm);
19.0 in (483 mm) with rack ears
Depth 14.59 in (371 mm)
Weight 17.8 lb (8.1 kg)
33
Anzeige
Mission LX-2 MKII: Hohe Klangansprüche für den kleinen Geldbeutel
qc_hifitest_banner-01-links_1616674467.jpg
qc_hifitest_banner-02-mitte_2_1616674467.jpg
qc_hifitest_banner-03-rechts_3_1616674467.jpg
>> Mehr erfahren

Händlersuche

Suchen Sie hier nach einem Händler in Ihrer Nähe!

Deutschland  |  Schweiz

Das könnte Sie auch interessieren