Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: D/A-Wandler
Ausstattungsliste: APL DSD-MR MK2
Specification | |
Digital Inputs | Two RCA Coaxial digital inputs. |
AES/EBU professional standard balanced digital input. | |
TOSLINK Optical digital input. | |
Note! RCA, AES/EBU and Optical inputs accepting up to 192kHz/24bit PCM. | |
USB input accepting PCM up to 384kHz/32bit, up to DSD128 in DoP and up to DSD512 in NativeDSD format. Both 44.1kHz and 48kHz based DSD. | |
Note! All PCM rates from RCA, AES/EBU, Optical and USB digital inputs are converted to DSD128, DSD256 and DSD512 in Zero filter mode. | |
Two DTR inputs using balanced I2S transmission protocol for connecting to DTR-MR digital transport and DNP-SR network player. | |
Analog Outputs | Single Ended RCA outputs with top-line Furutech Rhodium plated RCA connectors. |
Balanced XLR outputs with top-line Furutech Rhodium plated connectors. | |
Note! RCA and XLR outputs cannot be used simultaneously. Please select RCA or XLR from switch on the back. | |
Output level – 2.5V RMS at 0dBFS. | |
Output impedance – approximately 100 Ohms. | |
Power input and fuses | IEC power inlet made by Furutech NCF series. |
115V or 230V / 50-60Hz, factory pre-set. | |
Other power input voltages available on request. | |
0.1A fuse for standby power supply. | |
2A special ceramic fuse. | |
Dimensions and weight | W450 x H120 x D380 millimeters. |
Height with feet included – 140 millimeters. | |
Weight – 24.5kg unpacked. |