Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenEs gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Vollverstärker
Ausstattungsliste: PS Audio Sprout
Specifications | |
Physical | |
Unit Weight | 2.9 lbs |
Unit Dimensions | 6” x 8” x 1.75” |
Power requirements | |
Input Power | Model specific 120VAC, or 230VAC 50 or 60Hz |
Power Consumption | <10W idle, 125W maximum |
Phono Audio Input | |
Connector | RCA (X2) |
Cartridge type | Moving Magnet |
Cartridge Output (5cm/s) | 2mV to 50mV |
Cartridge load impedance | 47KΩ(100pF) |
Equivalent Input Noise | <1.6uV |
S/N ratio | >80dB (@analog output, ref 4VRMS maximum output) |
Analog Audio Inputs | |
Connector | 3.5mm stereo input |
Input level | 2.0VRMS (+6dBV) |
Input impedance | 10KΩ |
Analog Audio Output | |
Connector | 3.5mm stereo connector can be used for subwoofer or amplifier feeds |
Output level, nominal (@ rated cartridge input) | 1.0V (0dBV) with 5mV cartridge at reference level (volume at 100%) |
Output level, maximum | 4.0VRMS (+12dBV) maximum, Full scale digital or vinyl at +12dB over reference (volume at 100%) |
Output Impedance | 220Ω |
S/N ratio | >94dB (@analog output, ref 4VRMS maximum output) |
THD (power amp) | <0.03% (1W 50Hz-10KHz) |
<0.1% at rated power, 1KHz, 120VAC mains | |
S/PDIF Digital Input | |
Connector | RCA (Coax) |
Impedance | 75Ω |
Format | PCM |
USB Input | |
Connector | USB “B” Type |
Format | PCM |
Transfer mode | Asynchronous |
S/N ratio digital | >102dB (@analog output, ref 4VRMS maximum output) |
Bluetooth | |
Antenna | Built in |
DAC | Uses Sprouts built in asynchronous DAC over S/PDIF |
Stereo Power Amplifier Output | |
8Ω loudspeakers connected | 32 watts per channel, both channels driven |
4Ω loudspeakers connected | 50 watts per channel, both channels driven |
Headphone Output Power | |
16Ω headphones | 1W (1KHz, 1% THD) |
300Ω headphones connected | 200mW (1KHz, <0.03% THD) |
Headphone Output Impedance | |
From 10Hz to 10kHz | <0.3 Ohm |
228-1324
Magnepancenter |