465_23072_2
Topthema: Der Geburtstagslautsprecher
Revox Elegance G120 – Limited Edition 75 Years
Revox ist 2003 stolze 75 Jahre alt geworden. Alleine das ist schon Grund zum Feiern. Aber Revox hat auch ein besonderes Angebot für Fans, man kann gewissermaßen Mitglied in einem sehr exklusiven Club werden.
>> Mehr erfahren>> Alle anzeigen
390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Vollverstärker
Ausstattungsliste: Anthem STR Integrated Amplifier
Ausstattung & technische Daten
| PHONO PREAMPLIFIER | |
| Input Impedance | 100 Ω (MC), 47 kΩ (MM) |
| Input Capacitance | 270 pF (MM) 270 pF (MM) |
| Maximum Input (at 1 kHz for <0.1% THD 20 Hz - 20 kHz) | 3.6 mV (MC), 37.7 mV (MM) |
| Gain (default at 1 kHz, user adjustable ± 20 dB) | 55 dB (MC), 35 dB (MM) |
| RIAA Response | ± 0.1 dB (20 Hz to 20 kHz) |
| THD+N (at 1 kHz, 20 Hz - 20 kHz BW, 2 Vrms output) | 0.008% (MC), 0.005% (MM) |
| S/N Ratio (at 1 kHz, IEC-A, 2 Vrms output) | 82 dB (MC), 96 dB (MM) |
| PREAMPLIFIER | |
| Frequency Response | digital-in, 192 kHz 10 Hz - 50 kHz (+0.00, -0.50 dB) |
| digital-in, 96 kHz 10 Hz - 45 kHz (+0.00, -0.50 dB) | |
| digital-in, 44.1 kHz 10 Hz - 20 kHz (+0.00, -0.03 dB) | |
| analog-in, DSP mode 10 Hz - 40 kHz (+0.02, -0.20 dB) | |
| analog-in, direct mode 10 Hz - 80 kHz (+0.00, -0.10 dB) | |
| THD+N (at 1 kHz, 20 Hz - 20 kHz BW, 2 Vrms output) | digital-in, 44.1 kHz, 0 dBFS 0.0008% |
| analog-in, DSP mode, 1 Vrms input 0.001% | |
| analog-in, direct mode, 1 Vrms input 0.0020% | |
| SNR (at 1 kHz, IEC-A, 2 Vrms output) | digital-in, 44.1 kHz, 0 dBFS 112 dB |
| analog-in, DSP mode, 2 Vrms input 110 dB | |
| analog-in, direct mode, 2 Vrms input 120 dB | |
| Maximum Output (<0.1% THD) | 2.2 Vrms except analog-direct 3.3 Vrms |
| XLR Configuration | Pin 1: Ground, Pin 2: Normal, Pin 3: Inverted |
| POWER AMPLIFIER | |
| Power Output (per channel) (Continuous, 20 Hz - 20 kHz, <1% THD) | Impedance 8Ω: 200 W |
| Impedance 4Ω: 400 W | |
| Impedance 2Ω: 550 W | |
| THD (100 W) | 0.002% (1 kHz), 0.015% (20 kHz) |
| IMD (100 W) | ITU-R (19 kHz + 20 kHz) 0.0007% |
| SMPTE (60 Hz + 7 kHz) 0.005% | |
| SNR (IEC-A, ref. 200 W) | 114 dB |
| Frequency Response (20 Hz - 20 kHz) | ± 0.1 dB |
| Power Bandwidth (-3 dB at 200 W into 8 ohms) | 80 kHz |
| Slew Rate | 30 V/μs |
| Damping Factor (20 Hz - 1 kHz) | 330 |
| Channel Separation | 101 dB (100 Hz), 61 dB (10 kHz) |
| POWER REQUIREMENT | |
| 120 V version | In countries where the line voltage is 120 V, this product operates from a single phase AC power source that supplies between 108 V and 132 V at a frequency of 60 Hz. |
| 220-240 V version | In countries where the line voltage is 220, 230, or 240 V, this product operates from a single phase AC power source that supplies between 198 V and 264 V at a frequency of 50 Hz. |
| POWER CONSUMPTION | |
| Standby | 0.38 W (120V), 0.45 W (240V) |
| Standby + Network | 1.1 W (120V), 1.2 W (240V) |
| Idle | 40 W |
| Typical Use | 250 W |
| High Output | 500 W |
| DIMENSIONS | |
| Height | 6-3/4” (17.2 cm) |
| Width | 17” (43.2 cm) |
| Depth (not including power cord) | 17-1/2” (44.5 cm) |
| Weight (unpacked) | 40 lb (18 kg) |
