Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Vorverstärker
Ausstattungsliste: Electrocompaniet EC 4.7
Technical Data | |
Preamplifier section | |
Single ended operation (gain) | 0 dB |
Balanced operation (gain) | 6 dB |
Input impedance single (fixed) | 330 kohm |
Input impedance balanced (fixed) | 165 kohm |
THD single ended (1 V in, 1 V out, 1 kHz) | < 0.001 % |
Equivalent input noise | < 3 µV |
THD balanced (1 V in, 1 V out, 1 kHz) | < 0.0005 % |
Max. input single | > 10 V RMS |
Max. input balanced | > 20 V RMS |
Channel separation (1 V output, 1 kHz) | > 90 dB |
Attenuation (minimum volume) | - 75 dB |
Output impedance single | 100 ohm(fixed) |
Output impedance balanced | 50 ohm (fixed) |
Max. output Single ended | 8 V RMS |
Max output Balanced | 16 V RMS |
Output noise (400 Hz - 30 kHz) | Single ended : 5 µV Balanced : 10 µV |
Signal to noise (400 Hz - 30 kHz) | > 100 dB |
Frequency response (DC - 65 kHz) | - 0.4 dB |
The EC 4.7 is DC coupled from input to output. | |
Power consumption (no load or signal) | 15 W |
Dimensions | Width 483 mm / 19 inches |
Depth 410 mm / 16.1 inches | |
Height 115 mm / 4.5 inches | |
Weight 8 kg. / 17.6 lbs. | |
All measurements are made at 120V / 240V //50Hz / 60Hz | |
Clipping point of the preamplifier is set to a level where total harmonic distortion (THD) is 0.2% |
301-2004
Frankonia HiFi Studio |