Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Vorverstärker
Ausstattungsliste: Atmasphere MP-1
Features | |
Balanced Differential Design® | |
XLR connectors for phono and aux | |
XLR output connections | |
Patented direct-coupled Circlotronic® output | |
Fully regulated supplies featuring proprietory circuitry | |
Zero feedback design | |
Dual-mono construction | |
Differential passive phono equalization | |
Precision 24-position stepped volume control built from a Shallco® custom switch | |
Two tape monitors (tape functions use RCA | |
Precision components used throughout | |
Total system phase switch | |
Teflon® custom coupling caps | |
Low-noise "star" grounding topology | |
Power supply isolated in seconds chassis | |
headphone compatible with a simple connector | |
Three-year general coverage warranty with one year warranty on output tubes | |
Specifications | |
Line stage frequency response | Line stage frequency response .1 Hz - 400 KHz, +0 dB, -3dB ( -0.5 dB @ 250 KHz ) |
Line stage gain | 14 dB |
Line stage input impedance | 100 K Ω single-ended / 200 K Ω balanced |
Line stage output | 32 V into 600 Ω |
Output impedance | 30 Ω |
Phono stage input impedance | 47 K Ω, adjustable with rear panel loading strip |
Phono stage Input Overload | 300 mV |
Phono stage Max Output | ( at clipping ) 120 V peak-to-peak |
Phono gain | ~66 dB |
Phono bandwidth | .5 Hz - 100 KHz, -.5 dB |
RIAA accuracy | Within .07 dB |
RIAA Phono sensitivity | ( for 0.5 V @ 1 KHz ) 0.15 mV |
Power Supply storage | 170 Joules |
Tube complement | 8 x 12AT7 |
10 x 6SN7 | |
Dimensions | ( per chassis ) 13" deep x 17" wide x 5.5" tall ( 33 x 43 x 14 cm ) |
Faceplate dimensions | ( standard 3U rack, sans mounts ) 19" wide x 6" tall ( 48 x 15 cm ) |
Weight | ( per chassis ) 42 lbs. (19 Kg) |
Warranty | Three year, transferable |
One year for tubes |