Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenVon Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: JBL AM5212/64
Specification | |
Type | 2-Way Loudspeaker System with 1 x 12" LF |
Frequency Range ( –10 dB) | 37 Hz – 20 kHz |
Frequency Response ( ± 3 dB) | 43 Hz – 18 kHz |
Coverage | /64: 60° x 40° |
/66: 60° x 60° | |
/95: 90° x 50° | |
/00: 100° x 100° | |
/26: 120° x 60° | |
Crossover Modes | Bi-amp/Passive switchable |
Passive Crossover Frequency | 1.5 kHz |
Transducer Power Rating (AES) | LF: 400 W (1600 W peak), 2 hrs |
300 W (1200 W peak), 100 hrs | |
HF: 40 W (160 W peak), 2 hrs | |
Long-Term System Power Rating (IEC) | Passive mode: 300 W (1200 W peak), 100 hrs |
Maximum SPL | Bi-amp mode: |
LF: 122 dB | |
HF: 131 dB | |
System Sensitivity (1W @ 1m) | Passive mode: 115 dB SPL |
Low Frequency Driver | 1 x JBL 262H-1 300 mm (12 in) driver with 50.8 mm (2 in) dual voice coil |
Nominal Impedance | 8 ohms |
Sensitivity (1W @ 1m, within operational band) | 97 dB SPL |
High Frequency Driver | JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil |
Nominal Impedance | 8 ohms |
Sensitivity (1W @ 1m) | 113 dB SPL |
Waveguide | PT-H126HF-1 |
Enclosure | Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood |
Suspension Attachment | 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware |
Finish | Black DuraFlex™ finish. White available upon request. |
Grille | Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. |
Input Connector | NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. |
Environmental Specifications | Mil-Std 810; IP-x3 per IEC529 |
Dimensions (H x W x D in vertical cabinet orientation) | 713 x 371 x 458 mm (28.06 x 14.6 x 18.1 in) |
Net Weight | 20.2 kg (45 lb) |
106-2394
HiFi Gogler | Oliver Gogler e.K. |