462_22882_2
Topthema: Feurig
High-End-Standbox mit ESS AMT
Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigen
379_21926_2
Topthema: Die ewige Legende
Harwood Acoustics LS3/5A
Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Stereo
Ausstattungsliste: Zu Audio OMEN DEF Mk.I-B
Ausstattung & technische Daten
| Specifications | |
| Mk.I-B Upgrade Detail | Zu nanotech drivers are now standard equipment (Zu103ND/G1-16) these are the same units developed for our Dominance and as used on Defi nition Mk.IV and Mk.III. |
| They feature our high-output motor assembly, 16 ohm magnetically neutral-hung voice coils and paper-cored nanotech cones. No other changes are done. Original Omen Def loudspeakers can be fi eld upgraded. | |
| Markings for Omen Def Mk.I-B are: REVISION-B nameplate and the engraved model identifi cation on the drivers’ center cone. | |
| Design | High effi ciency, high output, moderate impedance, direct radiating, fl oor-standing loudspeaker. |
| Omen Def Mk.I-B features Zu’s full-range driver (Zu103ND/G1-16), in the Zu Defi nition architecture, Zu-Griewe driver/box/room acoustic loading technology, no crossover or fi lters on full-range drivers, | |
| complimented by a dynamic tweeter featuring phenolic-composite dome and machined 6061-T651 billet lens, providing the acoustic sparkle and resolution from 10kHz and up. | |
| Launched | Mk.I-B June 2012, shipping August 2012 (Mk.I-A November 2010) |
| Dimensions H W D | 47 x 12 x 12 [119.4 x 30.5 x 30.5cm] |
| Footprint | 12 x 12” [30.5 x 30.5 cm] |
| Weight | 78 pounds [36kg] |
| Packaged | 78 pounds [36kg] FlexPak, one loudspeaker per shipping box, 84 pounds [38kg] |
| Driver Complement | 2x Zu103ND/G1-16, 10-1/3” full-range nanotech driver in Zu Defi nition array covering 30–12,000 Hz Zu APT-L2 tweeter assembly |
| Component Tolerance | better than 1% driver pair matching, 0.1% on all other electrical components |
| 5-Way Binding Posts (CE compliant) | accepting: 1/4” spade [6.3mm fork], 5/16” spade [8mm fork], bare wire ≤ #4 AWG, banana plugs |
| Efficiency | 100dB SPL @ 1W/1m |
| Impedance | 8 ohm, nominal full bandwidth (5 ohm minimum at 270 Hz) |
| Average Room / Moderate Volume | 2–4 watt |
| Large Room / Loud | 4–16 watt |
| Large Room / Concert Level | 16–50 watt |
| Max Music Input Power | 400 watt |
| Max sustained RMS Power | 300 watt |
| Bandwidth | 30–25kHz |
| Group Delay | < 5ms |
| Horizontal Acoustic Center | 35” [89cm] |
| Horizontal Listening Window | 45° |
| Vertical Listening Window | 20° |
| Full-range Driver Network | none |
| Super-tweeter Network | 2nd order Bessel @ 10kHz (Erse PusleX condensers and ALq chokes) |
| Internal Cabling | Zu Mission hookup wire, pure copper |
| Cabinet | North American made high-density 60HD composite MDF, skinned with real wood veneer |
| Spike / Feet Insert Thread | 3/8–16 TPI (9/16” hex nut, 14mm wrench can be used but is tight) |
| Included With Loudspeaker Pair | hard surface ball end footers installed with S.S. 9/16” jam nuts, also included are carpet spikes |
| Manufacturers Country Of Origin | U.S.A. [98%] |
| Life Expectancy | 100 years plus, all parts |
| Compliances | CE | RoHS | WEEE |
| Warranty & Service | 5 years limited on cabinet and drivers—warranty does not cover misuse, abuse, components upstream from the loudspeaker system, modifi cations or non-factory service. |
