Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenVon Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Stereo
Ausstattungsliste: Spendor SP1 2R2
Features | |
Spendor 21cm drive unit with phase correction design | |
Copper shielded midrange pole for low distortion | |
High grade crossover network with gold conductors | |
Silver plated pure copper internal cables throughout | |
Gold plated binding posts on the rear | |
Temperature stabilised rubberised cabinet damping pads | |
Classic thin-wall design to reference standards | |
Specification | |
Description | 3-way stand mounting loudspeaker |
Enclosure type | Reflex |
SHF drive unit | 22mm wide-surround dome with fluid cooling |
HF drive unit | 38mm soft dome with copper shaded pole |
LF drive unit | Spendor 210mm polymer cone |
Sensitivity | 88dB for 1 watt at 1 metre |
Crossover point | 2.8 kHz, 13 kHz |
Frequency response | 55 Hz to 20 kHz ± 3dB anechoic |
Typical in-room response | -6dB at 45 Hz |
Impedance | 8 ohms nominal |
Impedance minimum | 7 ohms |
Power handling | 150 watts unclipped programme |
Terminals | Gold 2/3 way binding posts bi-wired |
Cabinet (HxWxD) | 635 x 300 x 300mm |
Finish | cherry (dark walnut to special order) |
Weight | 18 kg each |
Stand height | 400-500mm (not supplied) |
301-2009
Frankonia HiFi Studio |