390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigen
462_22882_2
Topthema: Feurig
High-End-Standbox mit ESS AMT
Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Stereo
Ausstattungsliste: Aerial Acoustics 7T
Ausstattung & technische Daten
| Specification | |
| Frequency Response | 28Hz to 25kHz ±2dB, -6dB at 23Hz |
| Dispersion | 30Hz to 15kHz +0, -3dB from axial response 45 degree horizontal measurement window |
| Sensitivity | 89dB for 2.83 volts at 1 meter on axis |
| Impedance | 4Ω nominal, 3Ω minimum, low reactance |
| Power Requirement | 25 watts minimum, 100 or more recommended |
| Woofers | Twin 7.1″ (180mm) with cast magnesium frame, rigid bilaminate composite cones, large magnets, 1.5″ coils, long and linear Xmax |
| Midrange | 5.9″ (150mm) with cast magnesium frame, special Papyrus blend cone, copper pole sleeve, dual magnets1.25″ coil, long and linear Xmax |
| Tweeter | 1.0″ (25mm) with thick machined aluminum plate, soft ring-dome design with machined wave guide, dual magnets, 1.0″ coil, copper pole sleeve |
| Crossovers | Fourth order acoustic Linkwitz-Riley at 400 Hz and 3,000 Hz crossover frequencies, 2 physically separate networks on glass-epoxy PCBs, bi-wirable and biampable, high-purity copper wiring and silver solder, premium passive components |
| Cabinet | 9 layer laminated, curved, stressed MDF walls, 7 interlocked full-size braces, tongue and groove joints, 2-piece curved and damped baffle, architectural veneers |
| Finishes | Gloss Rosenut, Nero Metallic Black |
| Grille | Cloth covered curved steel with hexagonal windows, 8 Neodymium magnets, no visible mounting hardware |
| Connections | Four gold-plated binding posts with copper jumpers, bi-wire and bi-amp capable |
| Included Accessories | Nero metallic black base, adjustable feet, adjustable spikes, floor protectors |
| Optional Accessory | Exposed machined hardware on laser cut steel bars |
| Dimensions HWD | 44.5 × 9.7 × 15.3″ (1130 × 245 × 390mm) |
| Weight Each | 96lbs (44kg) |
