390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigen
465_23072_2
Topthema: Der Geburtstagslautsprecher
Revox Elegance G120 – Limited Edition 75 Years
Revox ist 2003 stolze 75 Jahre alt geworden. Alleine das ist schon Grund zum Feiern. Aber Revox hat auch ein besonderes Angebot für Fans, man kann gewissermaßen Mitglied in einem sehr exklusiven Club werden.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Tannoy CMS 501
Ausstattung & technische Daten
| Specification | |
| SYSTEM | |
| Frequency Response (-3dB) (1) BM Back can | 85Hz - 22kHz |
| Frequency Range (-10dB) (1) BM Back can | 74Hz - 24kHz |
| Frequency Range (-10dB) (1) PI Back can | 71Hz - 24kHz |
| System Sensitivity (1W @1m) (2) | 89dB (1W = 2.45V for 6 Ohms) |
| Nominal Coverage Angle | 90 degrees conical |
| Coverage Angle (1kHz to 6kHz) | 105 degrees |
| Directivity Factor (Q) | 5.6 averaged 1kHz to 6kHz |
| Directivity Index (DI) | 7.0 averaged 1kHz to 6kHz |
| Rated Maximum SPL | Average: 106dB Peak: 112PdB |
| Power Handling (3) | Average: 50W Programme: 100W Peak: 200W |
| Recommended Amplifier Power | 100W @ 6 Ohms |
| Nominal Impedance | 6 Ohms |
| Transformer Taps (via front rotary switch) | 70V: 30W / 15W / 7.5W / 3.75W / OFF & low impedance operation 100V: 30W / 15W / 7.5W / OFF & low impedance operation |
| Crossover | 7kHz inductively coupled |
| TRANSDUCERS | |
| Low Frequency | 130mm (5.00") mineral loaded polypropylene ICT™ |
| High Frequency | ICT™ aluminium dome |
| PHYSICAL | |
| Enclosure | Back Can: Zinc plated steel Baffle: Reflex loaded UL 94V-0 rated ABS Grille: Steel, with weather resistant coating |
| Safety Features | Safety ring located at rear of enclosure for load bearing safety bond |
| Clamping Design | Min / Max Clamping Range: 8.0mm (0.32") / 29.0mm (1.14") Recommended Clamp Torque: 1.5Nm |
| Back Can Options | Blind Mount (BM): Complete with fixed back can Pre Install (PI): Separate back can for pre installation |
| Cable Entry Options | Cable clamp & squeeze connector for conduit up to 22mm |
| Conduit Knockouts | 3 Sets of horizontal positions: 19 / 22 / 28mm (0.75” / 0.87” / 1.10”) |
| Connectors | Removable locking connector with screw terminals with "loop through" facility |
| Safety Agency Ratings | UL-1480, UL-2043, CE |
| BM Hole Cutout Diameter | 190mm (7.48") |
| PI Hole Cutout Diameter | 190mm (7.48") |
| Dimensions | Bezel diameter: 210mm (8.27") BM model: Front of ceiling to rear of back can 189.50mm (7.46") BM model: Front of ceiling to top of safety loop 206.80mm (8.14") |
| PI model: Front of ceiling surface to rear of speaker unit 135.60mm (5.34") PI model: Front of accessory back can bezel to top of safety loop 153.5mm (6.04") | |
| Net Weight (ea) | CMS501 BM: 3.60kg (7.94lbs) CMS501 PI: 2.90kg (6.39lbs) PI back can: 2.60kg (5.73lbs) |
| Included Accessories | C Ring Tile bridge Paint mask Cutout template Grille |
| Optional Accessories | Plaster (mud) ring CMS501 PI back can |
Top Händler
|
305-2128
MD Sound GmbH & Co. KG |
