462_22882_2
Topthema: Feurig
High-End-Standbox mit ESS AMT
Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigen
390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Kopfhörerverstärker
Ausstattungsliste: Exposure XM HP
Ausstattung & technische Daten
| Features | |
| Custom-made toroidal power transformer | |
| High quality all aluminium casework and extruded front panel | |
| High quality resistors & capacitors used in the signal path | |
| All discrete audio output stage with high drive capability for low impedance headphones | |
| 2 pairs of 6.35mm jacks and 2 pairs of XLR sockets allowing 2 pairs of headphones to be used at one time | |
| Moving magnet phono and two line level inputs | |
| Two coax (bnc) and two optical inputs and one class 2 USB input with DSD | |
| Separate pre-amp output | |
| Remote control | |
| Three year guarantee | |
| Available in black or titanium | |
| Analogue Inputs | |
| Pre Amplifier Output (input sensitivity / impedance / S/N) | AUX/PH input MM : 2.5mV @ 1KHz, 47K ohms S/N > 73dB |
| Frequency Response | +/-0.5dB 50Hz-20KHz. High pass roll off -1.5dB @ 20Hz |
| AUX 2 & AUX 3 input line | 350mV @ 1KHz > 14K ohms output gain x3.75, +11.5dB |
| Total Harmonic Distortion | <0.005% at 1KHz : @ 1.3V RMS output |
| Frequency Response | 20Hz - 20KHz +/- 0.5dB |
| Signal to Noise Ratio ref 1.3V RMS Output | 1KHz >92dB |
| Channel Separation @ 20KHz | >60dB |
| Digital Inputs | |
| SPDIF inputs BNC Coax & Optical | 32 - 192KHz @ 16-24 bits |
| Total Harmonic Distortion | <0.005% at 1KHz @ 1.3V RMS output |
| Signal to Noise Ratio ref 1.3V RMS Output | 1KHz : >98dB |
| USB input | Linear PCM 44K1 - 192KHz @ 16-24 bits DSD x64 (DoP) Asynchronous transfer from host |
| Headphone Output | |
| Output Impedance | < 5 ohms |
| Maximum Level into 33 ohms load : @ 1KHz & 0.01% THD | 7V RMS (1.5W) |
| Total Harmonic Distortion : @ 2V output, 1KHz | <0.003% (120mW) |
| Maximum Level into 330 ohms : @ 1KHz & 0.01% THD | Maximum Level into 330 ohms : @ 1KHz & 0.01% THD : 7.5V RMS (170mW) |
| Total Harmonic Distortion | @ 2V output, 1KHz : <0.003% (12mW) |
| Load Impedance total all outputs | 16 ohms minimum |
| General Specifications | |
| Mains Supply | 110/120V or 220/240V @ 50/60Hz (factory set) |
| Power Consumption | <15W |
| Dimensions (WxHxD) | 218mm x 89mm x 363mm (inc knob) |
| Net Weight (unpacked) | 4kg |
