Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: D/A-Wandler
Ausstattungsliste: JDS Labs Standalone ODAC Rev B
DAC Performance | |
Freq. Response 20Hz-20kHz | +/- 0.04dB |
THD+N 100 hz -0.15 dBFS | 0.0028% |
THD+N 20 hz -0.15 dBFS | 0.0015% |
THD+N 10 Khz -0.15 dBFS | 0.0024% |
IMD CCIF 19/20 Khz -6.03 dBFS | 0.0015% |
IMD SMPTE -6.03 dBFS | 0.0015% |
Noise A-Weighted dBu | -103 dBu |
Dynamic Range (A-Weighted) | > 112 dB |
Linearity Error -90 dBFS 24/96 | -0.08 dB |
Crosstalk -10 dBFS 100K 3.5mm | -86.40 dB |
USB Jitter Components | 11025Hz -112.3dB |
Maximum Output Line Out 100K | 2.1 VRMS |
Distortion | < 0.005% |
Data Support | |
Audio Formats | 16/44, 16/48, 16/88.2, 16/96, 24/44, 24/48, 24/96 |
Interface | USB, Audio Class 1 |
Native Driver OS Support | Windows XP & Later, OS X x86, iOS, PS4, Linux |
Connectivity | |
Inputs | Mini-USB |
Output | 3.5mm (or RCA), line level |
Power | Self-powered by USB |
Dimensions | |
Case dimensions | 99.0 x 63.0 x 13.0 mm |
Weight | 2oz |
Package Contents | Fully assembled, tested Standalone ODAC, RevB |
Mini-USB cable with ferrite | |
Instructions: Standalone ODAC | |
OPTIONS | |
Black, Standard Output | Digital USB input and 3.5mm analog output jacks. |
Silver, Standard Output | Digital USB input and 3.5mm analog output jacks. |
RCA Output | Same as above, with 3.5mm and USB jacks at front, plus additional RCA line output jacks on the rear side. |
Available exclusively in Black. | |
ODAC has a single output stage; both 3.5mm and RCA outputs are driven simultaneously. | |
You may connect any two devices each with input impedance of at least 10k. |