Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: AV-Endstufen
Ausstattungsliste: Bryston 875HT
Features | |
Balanced XLR and Single ended RCA input | |
8 Channels each with fully independent power supplies including two separate transformers | |
75W into 8 ohms (and up to 100 into 4 ohms) per channel | |
The patented Salomie circuit found in all Cubed Series amplifiers | |
Rear panel channel trim pots | |
Switchable gain (23dB or 29dB) | |
Fully convection cooled means no noisy fans | |
Machined and anodized aluminum enclosure and dress panel | |
Less than 500mW standby power consumption | |
SoftStart microprocessor controlled startup sequence won | |
DC trigger for automated turn on and turn off | |
Silver or black faceplate | |
17” or 19” faceplate (rack mountable) | |
Specification | |
Dimensions | Inches: 17 or 19 W x 3.5 (plus feet) H x 19 D |
Weight | 55 lbs | 25 kg |
Frequency Response | <1Hz - 100kHz: -3dB |
THD+N (20Hz-20kHz @ Rated Power, 8Ω) | <0.007% |
Power Output (per channel) | 75W @ 8Ω | 100W @ 4Ω |
Noise | RCA: <-105dB |
XLR: <-107dB | |
Input Impedance | Unbalanced 7.5kΩ |
Balanced 5kΩ / leg |