Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Stewart Audio CVA50MX-1
Specification | |
Type | 4 Channel Mixer Amplifier - 50W x 1 |
4 Ohm/8 Ohm Power | 25W x 2 |
25.5V/70.7V Power | 50W x 1 |
Frequency Response (+0, -3 dB) | 100Hz - 20kHz |
Power Bandwidth (+3dB, -3dB) | 80 Hz-30 kHz |
THD+N | <.1% @ Full Power |
Signal-to-Noise Ratio | >90dB |
Remote Volume Control | 0-10VDC |
External Mute | Contact Closure |
Ducking | 0 to -90dB (Adjustable) |
Phantom Power | +48VDC (Switchable) |
Input Sensitivity of Mic Input | 0dB (1V) or -30dBV (30mV), Selectable |
Input Sensitivity of Inputs 2-4 | 0dB (1V) |
Standard Voltage Gain | 40x (32dB) |
Input Impedance | 10k Ohms |
Standby, Idle Current Draw, 1/8 Power Draw | .005/.01/.15A |
Class | D |
Input Connectors | Mic (3-pin Euroblock), RCA, 3.5mm, 3-pin Euroblock |
Output Connectors | Euroblock |
Power Supply | External in-line 48VDC (Included) |
Cooling | Convection-Cooling (No Fans) |
Controls | 4 level controls, 1 Master Level, Ducking |
LED Indicators | Power, Signal Present & Clip |
Construction | Aluminum Chassis |
Dimensions (height, width, depth) | 1.4"H x 6.2"W x 4"D |
Weight | 1.2lbs |