Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Endstufen
Ausstattungsliste: Atmasphere MA-3
Specifications | |
Output power | 500 watts per channel, 2-16Ω load before clipping |
Impedance | Input Impedance: 100 KΩ single-ended, 200 KΩ balanced selectable to 600 ohms |
Input | 2.5 V sensitivity |
RCA and XLR true balanced differential input | |
Tube complement | (per channel) 42 x 6AS7G output tube |
12 x 6SN7 driver tube | |
Power Bandwidth | 1-100KHz within ½ dB |
Power Storage Capacity | 1/4 Farad per channel (more than any production amplifier) |
Frequency response | (1 watt, open loop) 20 Hz squarewave tilt: unmeasureable even at full power |
1Hz-200KHz within 1/2 dB | |
Distortion | Total Harmonic Distortion (THD) typically .5% at full power |
Intermodulation (IM) distortion typically under 0.004% at full power | |
Output section risetime | 600 V/µs Power Supply |
Weight | (per chassis) 152 lbs ( 68.9 kg ) |
Power Supply Dimensions | (per chassis) 34" deep x 21" wide x 12.5" tall (86 x 53 x 32 cm) |
Amplifier Weight | (per chassis) 80 lbs (36.3 kg) |
Amplifier Dimensions | (per chassis) 31.5" deep x 21" wide x 15" tall (80 x 53 x 38 cm) |
Panel Meter Functions | VU level |
Individual tube condition | |
Tube Bias status | |
DC Offset status | |
AC line voltage | |
AC line regulator voltage |