462_22882_2
Topthema: Feurig
High-End-Standbox mit ESS AMT
Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigen
465_23072_2
Topthema: Der Geburtstagslautsprecher
Revox Elegance G120 – Limited Edition 75 Years
Revox ist 2003 stolze 75 Jahre alt geworden. Alleine das ist schon Grund zum Feiern. Aber Revox hat auch ein besonderes Angebot für Fans, man kann gewissermaßen Mitglied in einem sehr exklusiven Club werden.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Endstufen
Ausstattungsliste: Atmasphere MA-2
Ausstattung & technische Daten
| Features | |
| Balanced Differential Design® | |
| Class-A operation | |
| Patented Circlotronic® direct-coupled (OTL) output stage | |
| Automatic bias, so no adjustment is needed | |
| Built in VU meter for tube and output monitoring | |
| Copper foil V-Cap Teflon coupling caps | |
| Easily monostrapped for greatly increased power | |
| Standby switch for long output tube life | |
| Dual AC power circuits for each chassis | |
| Uses only one gain stage for simplicity and clarity of sound | |
| Proprietary precision components used throughout | |
| Low-noise "star" grounding topology | |
| Fully hand-wired point-to-point electronics - no circuit boards! | |
| Stable with all input and load conditions | |
| Exclusively uses Octal-Triode based vacuum tubes | |
| Specifications | |
| Output power | 220 watts per channel into a 4, 8, or 16 Ω load before clipping |
| Impedance | Input Impedance: 100 KΩ single-ended, 200 KΩ balanced - selectable to 600 Ω |
| Output Impedance: ~1.75 Ω ( open loop ) | |
| Input | Selectable up to 600 Ω |
| 2.8 V sensitivity | |
| RCA and XLR true balanced input | |
| Tube complement | ( per channel ) 20 x 6AS7G output tube |
| 6 x 6SN7 driver tube | |
| Gain | 26dB ( for 8 Ω ) |
| Power Bandwidth | 2Hz-150KHz within 1/2 dB |
| Frequency response | ( 1 watt, open loop ) 20 Hz squarewave Tilt; unmeasureable 1Hz-200KHz within 3 dB |
| Distortion | Total Harmonic Distortion ( THD ) typically 1% at full power |
| Intermodulation ( IM ) distortion typically under .04% at full power | |
| Phase shift less than 1° @ 20KHz | |
| Output section | 600 V/µs |
| Feedback | 2 dB |
| Power consumption | 800 watts/channel |
| Power Supply Current | 80 Amps/channel |
| Power Supply storage | ( per channel ) 1200 Joules in output section, 100 Joules in Driver supply |
| Dimensions | ( per chassis ) 28" deep x 17" wide x 10" tall ( 71 x 43 x 25 cm ) |
| Weight | ( per chassis, without tubes ) 103 lbs ( 46.7 kg ) |
| Warranty | Three year general coverage |
| One year for output tubes | |
