Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Car Hifi sonstiges
Ausstattungsliste: Cadence QSA8.2
Product Description | 2.1 System Featuring 8” Built-In Active Sub and Amped Output to Speakers |
Subwoofer Specs | |
RMS Power Handling | 100 Watts |
PEAK Power Handling | 200 Watts |
Frequency Response | 20Hz - 150Hz |
SPL @ 1w/1m | 90dB |
System Impedance | 2-Ohm |
Minimum THD | < 0.4% |
S/N Ratio | > 90dB |
High Level Input Sensitivity | 0.8V |
Low Level Input Sensitivity | 180mV |
Low Pass Filter | 50Hz - 150Hz |
Bass Boost | 0 to +18dB |
2-Channel Amplifier Specs | |
Rated Power | 75 Watts x 2 @ 4-Ohm |
Minimum THD | < 0.1% |
Frequency Response | 50Hz - 20 kHz |
Fuse Rating | 30 amps x 1 |
Dimensions (L x W x H) | 13.5" x 9.8" x 2.7" |
High Level Input Sensitivity | 1.0V |
Low Level Input Sensitivity | 200mV |
Subsonic Filter | 50Hz - 150Hz (HPF) |
Features | |
MosFET PWM (Pulse Width Modulated) Power Supply | |
Thermal, Overload, and Speaker Short Protection | |
Auto Power On | |
Soft Turn-On Circuitry | |
Remote Turn-On / Turn-Off Circuitry | |
Variable Input Gain Control | |
Variable Low and High Pass Crossover | |
Variable Bass Boost | |
Variable Phase Shift | |
RCA Low Level Inputs | |
High Level Input | |
Outputs Allow for 2.1 System Recreation | |
LED Power and Protection Indicators | |
Remote Subwoofer Level Control |