Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenEs gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Car Hifi Endstufe 4-Kanal
Ausstattungsliste: Arc Audio SE 4100
Features | |
Audiophile sound quality based design | |
Designed by Robert Zeff | |
Class A/B switching design | |
Microprocessor controlled design | |
Microprocessor controlled Code based flashing diagnostics | |
Concealed adjustment controls | |
Open architecture adjustable crossovers on all channels HP/BP/LP/FP | |
12/24Db per octave selectable crossover slopes on all channels | |
Internal chassis force cooled speed controlled fan for optimum cooling | |
Hi/Low level balanced switchblade RCA inputs for maximum system integration | |
RJ45 Ethernet input connections for true balanced input connections | |
Block type terminal connections | |
256 color user selectable illumination circuit | |
Combined Bias circuit and temperature regulation circuit to regulate bias and lower THD at any point in total thermal cycle | |
Microprocessor high voltage power supply allows the amplifier to optimize power output at different ohm loads without the loss of efficiency or sound quality | |
Vdrive based preamp stage improves efficiency lower internal signal loss | |
Hand picked output devices used on all SE amplifiers. | |
Specifications | |
4 Channels @ 4 ohms | 65 Watts |
4 Channels @ 2 ohms | 110 Watts |
2 Channels @ 4 ohms (Bridged) | 220 Watts |
2 Channels @ 2 ohms (Bridged) | 145 Watts |
Frequency Response | 4Hz - 100kHz |
Crossover Range | 30Hz - 500Hz |
Crossover Range X10 | 300Hz - 5500kHz |
Bass Boost | 0 - 15dB @ 20Hz - 80Hz |
S/N Ratio | 93 dB (RCA In) |
Input Sensitivity (Low) | .3V - 4V |
Input Sensitivity (Bal) | .4V - 8V |
Max current draw | 79A @ 540 Watts 20% THD |
Idle Current | 3 Amp |
Fuse | 2 x 40 Amps |
Dimensions | 15.5" (L) x 8.0" (W) x 2.5" (H) |
323-2511
Masori |